2017 CIP Training

CIP refers to a cleaning and disinfection cycle. What takes place during the "cleaning" component of this process?

Removal of organic and mineral soil.

Elimination of microbiological contamination.

Removal of mineral deposits such as calcium, manganese, and iron.

A and C

Why are acid cleaners used in a 7-Step CIP?

To eliminate mineral deposits such as calcium, manganese, iron, and magnesium

To remove microorganisms

To remove grease and proteins.

To fulfill a weekly requirement.

Which of these is NOT a condition of an efficient CIP?

Time

Temperature

Training

Torque

All operators are to refer to the current version of their line's SOP when performing the CIP procedure. Where are these documents located?

There are printed copies at each line

Located in the Production share drive.

Water Processing will provide you a printed copy.

Button links on the Infinity CIP standard project or through the Teamrooms link on the line's standard project.

For exterior sanitations, which of these statements is TRUE?

The cleaning process includes the cap hopper, cap chucks, chute, and guards

Maintenance Intervention forms are required to be completely filled out following filler intervention.

Foaming includes the filler, walls, floor, window, and drip pans.

All of the above.

The filler has been down for less than six hours and no physical intervention has occurred. How do you determine the required corrective action?

Run a 5 Step CIP just in case.

Ask a nearby operator.

Consult the Sanitation / CIP Decision Matrix.

Consult any printed documents at your work station.

Which of the following are required checks when performing a CIP?

Chemical residual tests to verify the absence of chemicals in the final rinse water.

Integrity tests of the 0.2 filter housing after the completion of each CIP.

PH meter calibration checks

A and B

Which of these products contain chlorine?

AC-55

Oxonia Active

Principal

Foam Shine

True or False: If finished product pH and conductivity measurements are in-specification, it is safe to conclude that the water used in the finished product is free of residual CIP chemicals.

True

False

How do you detect the absence of caustic cleaner following a CIP?

Finished product pH measurements

PH of rinse water and final rinse

Indicator P test

Conductivity measurements

Which of these tests is an operational prerequisite (OPRP)?

Finished product pH measurements

Conductivity measurements

Verification that the pH of filler water and rinse water is within 5%.

Filter housing integrity tests.

2017 CIP Training

More Quizzes