Oversize Workstation - 20 Questions - Alternative

Which sections of the process all happen at the Oversize Station?

Identification, Allocation and Photography

Allocation, Measurement and Photography

Measurement and Photography

Photography and Quality Inspection

When is a beverage allowed in the Oversize workstation?

Always

Never

Once a week

Twice a week

How should you open your part at the Oversize Station?

Any way you choose

As destructive as possible

The least destructive way possible

With a hammer and crowbar

When processing parts at the Oversize station, when is it appropriate to wear headphones?

Almost Always

Every day

Once a week

Never

When a part is too heavy to be handled manually, how will we lift the part?

Just try harder

Use a crowbar

Use the forklift

Use the Crane / ask for help

What is the required safety gear when working in the Oversize station?

Safety Glasses

Safety Vest

Gloves and Steel-toe boots

All of the above

Who is responsible for assigning Problematic Groups to Oversize parts at the Oversize Station?

Oversize Station Employees

Allocation Employees

Quality

The Supervisor

What is a good tool for measuring at the Oversize station?

A ruler

A micrometer

A flexible tape measure

The laser measurement device

How many people are required to safely use the crane to move an Oversize part?

After processing the last Oversize part available, what action should you take?

Wait until the next part arrives

Take a break

Find a new part to process by looking around the warehouse

Ask your supervisor which workstation needs help

Before closing your completed part, who should you alert?

Quality

Your Supervisor

The Lab Manager

Photography

When the forklift is dropping off new Oversize parts, where would be a safe place to be?

Right behind the forklift

Directly in front of the forklift as it drops off parts

2 feet away from the forklift

At least 5 feet away from the forklift and in sight of the driver

When using the Crane to lift a heavy part, what other pieces of equipment must you use?

The Hoist

Straps

Straps and the Hoist

Hammer and Crowbar

While measuring a part you accidentally drop it and damage the part. What should you do?

Hide the part and pretend like it never happened

Try to fix the part

Alert your supervisor and explain that it was an accident

Throw the part away, no one will ever know

What should you do before attaching your straps to the part for the first time?

Take a break

Notify your Supervisor

Request a Teammate

Zero out the scale

At the end of your shift, what steps should you take before leaving?

Clean up the workstation area

Log out and shut down the computer

Put all tools away

All of the above

What would be a good procedure for moving the part to the workbench, after it has been lifted?

Push the part over and hope it stops near the workbench

Move the crane to the workbench by yourself

Steady the part and slide it along the track to the workbench

Repackage the part and alert Quality

You notice a fellow employee slip a part into their pocket. What action should you take?

Ignore it

Alert your supervisor in private

Discuss it with other coworkers

Ask them for a piece of the profit

When measuring Oversize parts, what dimensions/data do we need to collect?

Length, Height and Weight

Weight and Length

Length, Width, Height and Weight

Just the Length

If a part is too long to measure alone, what action should you take?

Skip the part

Pass the part off on another employee

Ask your supervisor to provide you with help

Guess the measurement

Oversize Workstation - 20 Questions - Alternative

More Quizzes