CDC Quiz 1

A vibrant image showcasing a worker using power tools and wearing safety gear in a workshop, with signs emphasizing safety practices.

Safety Practices Quiz

Test your knowledge of essential safety practices and equipment usage in the workplace with our engaging quiz! This quiz covers important topics such as the proper use of drills, lifting slings, and personal protective equipment.

10 multiple-choice questions
Instant feedback on your answers
Perfect for safety training and awareness

10 Questions2 MinutesCreated by SafetyScribe420

Before using an electric drill, what is the first thing you should do?

Make sure the diameter of the hole to be drilled is within the capacity of the drill.

Connect the drill to the power source

Ask a coworker for assistance.

Insert the chuck key.

The purpose of cutting lubricant in most drilling operations is to increase the

Life of the drill only.

Speed of drilling only.

Frictional heat during drilling.

Drilling speed and the drill bit life.

Which minimum articles of safety gear must be worn when using a bench grinder?

Apron and gloves.

Eye and face protection.

Gloves and steel-toed boots.

Safety glasses and long sleeved shirt.

An electric saw blade must be operating at what speed before it contacts the material being cut?

Full

Low

Moderate

Accelerated

How many pounds per square inch (psi) of clean, dry air is required at the tool end of the air hose to ensure the tool is operating safely and efficiently?

110

125

What condition would prevent an operator from applying power to a hoist or other powered lifting device?

An AF Fonn 979 is attached to the unit.

Potential for lightning within 15 miles of the area.

Procedures are not covered in detail in the owner's manual.

The unit is tagged with a DD Form 1574-1 , condition code A.

What should be worn anytime there is a potential for injury from overhead objects during a lifting operation?

Kevlar.

Safety goggles.

Leather gloves.

Protective helmets.

What is the most common type of lifting sling used in the munitions career field?

Chain assembly.

Web strapping.

Metal mesh.

Wire rope.

The following are all good safety practices to follow when using a lifting sling except

Standing clear of the attached load.

Padding any sharp comers the sling may come in contact with.

Keeping your hands and fingers from between the sling and the load.

Inspecting the sling by passing your bare hand over the body of the sling.

The annunciators displayed on the Fluke 8025-series multimeter are used to distinguish among

Ohms, milliohms, and kilohms.

Ohms, kilohms, and megohms.

Amps, ohms, and millivolts.

Ohms, volts, and amps.

CDC Quiz 1

Safety Practices Quiz

More Quizzes