H3C Question Day 3 - Session 1 | Super Survey Maker

Create an infographic-style image depicting IPv4 and IPv6 address representations, networking symbols, and a quiz theme, with a modern and engaging style.

Networking Knowledge Quiz

Test your understanding of networking fundamentals with our comprehensive quiz designed for IT enthusiasts and professionals. This quiz covers various topics including IP addressing, routing protocols, and the nuances of IPv6. Get ready to challenge yourself!

Multiple choice questions
Cover essential networking concepts
Improve your networking skills

13 Questions3 MinutesCreated by LearningLion234

The source host when the ping destination device, if the network is working properly, the destination device after receiving the message, will respond to the source host ICMP packet

A. Echo Request

B. Echo Reply

C. TTL-Exceeded

D. Port-Unreachable

According to different sources, the routing table routing can generally be divided into several categories?

A. Routing Interface

B. Direct routes

C. Static Routes

D. Dynamic routing

The following statement on the IP address of the correct yes. (Select one or more)

A. IP address can be fixed in hardware, it is unique

B. IP addresses are divided into A, B, C, D, E five

C. IP address typically hexadecimal points represented by dots, for example: 10.110.192.111

D. IP address consists of 32 bits of binary Answer

The following statement on the IP address of the correct yes. (Select one or more)

A. IP address consists of two parts: the network number and host number.

B. A number of Class IP network address has 8 bits, the actual number of bits for the variable 7.

C. Class D IP addresses typically as a multicast address.

D. Address Translation (NAT) technique is commonly used to solve the Class A Class C addresses to addresses.

The following statement on the IP address of the wrong yes. (Select one or more)

A. IP address consists of two parts: the network number and host number.

B. A number of Class IP network address has 8 bits, the actual number of bits for the variable 7. The first octet 100 in the initial section

C. Class C IP addresses.

D. Address Translation (NAT) technique is commonly used to solve the Class A Class C addresses to addresses

The following statement on the IP address of the correct yes. (Select one or more)

A. IP address consists of two parts: the network number and host number Class

B. A first byte addresses from 0 to 126 (with 127 reserved for him)

C. IP addresses are usually represented in dotted decimal form, for example: 10.110.168.121

D. Host number part of the IP address are all binary 1 is referred to as a network address identifies a network all hosts

There are two hops from the source device to the destination device, and the tracert command is used to detect the path. When the first hop is detected, the source device sends a UDP packet with a TTL of 1 to a larger port of the destination device. When the packet reaches the middle hop, the TTL will be 0. Then the device pairs the source device. Respond to an ICMP message

A. Time Exceeded

B. Echo Request

C. Echo Reply

D. Port Unreachable

IPv6 uses notation to represent an address.

A. Colon hexadecimal

B. Dotted decimal

C. Colon decimal

D. Dot hexadecimal

The IPv4 address contains the network part, the host part, the subnet mask, and so on. Correspondingly, the IPv6 address contains

A. Network part, host part, network length

B. prefix, interface identifier, prefix length

C. prefix, interface identifier, network length

D. Network part, host part, prefix length

Which of the following are correct IPv6 addresses? (choose one or more)

The functions implemented by the IPv6 Neighbor Discovery Protocol include. (choose one or more)

Compressed expressions for IPv6 address 2001:0410:0000:0001:0000:0001:0000:45FF Which of the following are correct?

A. 2001:410:0:1:0:1:0:45FF

B. 2001:41:0:1:0:1:0:45FF

C. 2001:410:0:1::45FF

D. 2001:410::1::45FF

H3C Question Day 3 - Session 1

Networking Knowledge Quiz

More Surveys