Rulebook Quiz

Which of the following is/are false:

A) The ground clearance will be tested in Mechanical inspection only.

 

B) If an asymmetrical lay-up is used in the primary structure, the thinner skin must have a thickness of at least 40 % of the thinner skin.

 

C) Only check-valves for fuel vent application are permissible. The use of inline, one-way, or non-return one-way check-valves is strictly prohibited. The check-valve must facilitate the unrestricted entry and exit of air when in an upright position, and while in an inverted position, it must block the flow of fluids.

D) The technical inspection sheet includes several inspection points and will be provided on the competition website prior to the competition. It must always stay with the quick jack.

 

Find :(B/C) - [(A*C) /B] 

If:

A= Maximum points awarded for "Real Case" in Cost and Manufacturing Event.

B= The distance of foremost part of the vehicle to be staged in mm behind the starting line in the Acceleration event.

C= Penalty points awarded on missed Presentation Session with less than 48 hour notice.

In Autocross event, let

T(team) = 100.434 s

Time taken by fastest vehicle = 87.134 s

Calculate T(max)/T(team)

The vehicle must be equipped with fully operational front and rear suspension systems including shock absorbers and a usable wheel travel of at least X m and a minimum jounce of Y m with driver seated.

Find : 500X - (square root of 1000Y)

 

Fuel pumps must be off and fuel valves must be closed during refueling.

 

Which of the following are not false:

A) Faculty Advisors may help in documentation if needed.

B) In the side view any portion of the brake system that is mounted on the unsprung part of the vehicle must not project below the lower surface of the chassis.

C) Coolant - A substance used for heat transfer by conduction.

D) The perimeter shear strength of the monocoque laminate in the front bulkhead support structure must be at least 4000 N

Let

A = Penalty points awarded for submitting CRMR document after 86 hrs of submission.

B = One fifth of the total Percy length.

C = The distance of the free-field microphone from the exhaust outlet in mm , in Noise test.

Solve : A + [C/(A+B)] -A

Which of the following is/are correct:

A) SE3D = Structural Equivalency 3D

B) PS = Photographic Submissions

C) PTFE = Polytetrafluoroethane