MOCK TEST

Create a high-resolution image showing a racing vehicle being tested for aerodynamic compliance, with engineers analyzing data in a workshop setting.

Aerodynamic Device Compliance Quiz

Test your knowledge on the crucial requirements for aerodynamic devices and competition regulations! This quiz covers various critical topics to ensure safety and compliance in automotive engineering.

Expect questions on:

Force specifications
Brake system requirements
Fire safety standards
Material specifications

15 Questions4 MinutesCreated by TestingTech101

Any aerodynamic device must be able to withstand a force of _____ distributed over a minimum surface of _____ and not deflect more than ____ in the load carrying direction.

200KN, 225cm², 10mm

200N, 225cm², 100mm

0.2KN, 0.225 m², 10mm

200N, 0.0225m², 1cm

Which of the following elements must not be expanded on as a part of the pitch deck

Problem Statement and Solution

Team and Competition

Product ans Marketb Size

Funds and Contacts

If the vehicle is unable to pass the Brakes test after three attempts, the vehicle must be repaired and then brought back for retesting.

True

False

The LVMS must be mounted in the____ of a completely ____ circular area of _____ diameter placed on a high contrast background.

Right / red / less or equal to 50mm

Middle / red / less or equal to 50m

Middle / red / less or equal to 5cm

Middle / red / less than 0.005

For laminate testing the distance between the two test panels must be ____________

At most 40 cm

At least 40 cm

At least 0.04 m

More than 400mm

The brake system must have ___ a dependent hydraulic circuits such that in the case of a leak or failure at any point in the system, effective braking power is maintained on at least two wheels.

One

Two

Three

None of the above

The supporting document is limited to a maximum of 50 pages, including the cover page and the Table of Contents.

True

False

Each team must have at least one dry chemical/dry powder fire extinguishers with a minimum firefighting agent capacity of____

0.9 kg

1 kg

900 grams

None of the above

Team briefing are conducted for:

Captain and drivers

Team members

Drivers

Captain, Vice Captain and Drivers

The competition technical inspection stickers will be placed on the ________ of the vehicle.

Dashboard

Main hoop

Nose

Side impact structure

For sleeved joints the sleeve must have a ____________ length of 38 mm either side of the joint

Not more than

Maximum

At least

Not mentioned in rulebook

Throttle cables must be located _____from any exhaust system component.

At most 50mm

At least 0.05m

At least 0.5cm

At least 0.005m

If the CRD is not identical with the uploaded version

It is not evaluated

Elimination from the cost event

Deduction of 5 points from the cost event score

Deduction of 5 points from the overall score

If a team is not present and ready to compete at the scheduled time, they forfeit attempt at that event.

True

False

Steel tubing has to be made from unalloyed carbon steel with a maximum content of 0.3% carbon_____________ and _______ of any other element

17/10 %Mn & 4/5%

1.7 % Mg & 0.6%

170/100 %Mn & 3/5%

1.7 % Mn & 3/6%

MOCK TEST

Aerodynamic Device Compliance Quiz

More Quizzes