Survey Maker Survey Templates Contact Privacy & Security

Dresden Quiz #1

A detailed illustration of an electric vehicle in a racing environment, showcasing intricate engineering and safety features, with a strong focus on dynamism and performance.

Dresden Quiz Challenge

Test your knowledge about the Dresden engineering standards and racing regulations with our engaging quiz! This quiz covers a variety of topics, including vehicle dynamics, safety standards, and performance metrics.

15 questions to challenge your understanding
Multiple-choice format for easy engagement
See how you rank against other participants

14 Questions4 MinutesCreated by EngineeringEagle42

All drivers have to wear shoes certified to...

SFI 3.3 or FIA 8856-2000

SFI 33.33 or FIA 8856-2012

SFI 3.3 or FIA 8586-2000

SFI 2.2 or FIA 8856-2000

Which is the exact resistance value for the IMD for a vehicle with a system voltage of 458V?

45.8 kOhm

343.5 kOhm

114.5 kOhm

229 kOhm

A steady DC current is flowing through a coil with an inductance of 248mH. The stored energy in the magnetic field is 431J. By how much does the current have to be increased, if the stored energy should be increased by 300J?

76.78A

17.820A

17.821A

17.822A

17.823A

17.824A

17.825A

76.76A

76.77A

76.79A

9.769A

9.768A

9.767A

9.766A

Which minimum spacing through air must be maintained between tractive system and GLV parts that are in the same enclosure, if the potential between those parts is above 200VDC?

9.5 mm (0.37 inch)

20 mm (0.75 inch)

6.4 mm (0.25 inch)

30 mm (1.2 inch)

Imagine the following key data of your 4WD EV car: torque per wheel – 350 Nm | tires` radius – 228 mm | power limitation – 80 kW At which theoretical velocity the car has reached the power limitation?

12 m/s

13 m/s

46 km/h

47 km/h

Which material is suited as a firewall for a cooling hose running through the monocoque under the driver`s legs?

Aluminum with holes smaller than 8 mm diameter

Aluminum grid with a minimal spacing of 2 mm between the strings

Aluminum without any holes

The material does not matter, if it is sealed

There is no firewall needed

The Design Spec Sheet is an official document of which category?

Which statement is wrong?

The front hoop must have an angle between 70° and 110° relative to the floor

You can upload your SES in an unfinished state (which will then fail) to gain time

The MHB must be on the side the Mainhoop leans to

The 95th percentile male is 183,5cm tall

Is it allowed to have a 2,8mm wide gap in the floor of your car?

Yes

What does the scale show?

100N

200N

150N

What cornering forces would be represented if the tilt table was not tilted to 60°, but to 70°?

2,74g

2,76g

2,75g

1,93g

1,92g

1,94g

A Car with a mass of 2000kg, which is travelling at 180km/h comes to a full stop in 200m. How big is the breaking power?

623kW

622kW

624kW

625kW

626kW

628kW

Which of the following answers is wrong?

Every team that finishes at least one Skidpad run without DNF get 3,5 points

Every team that finishes at least one Acceleration run without DNF get 3,5 points

Every team that finishes at least one Endurance run without DNF get 25 points

Every team that finishes at least one Autocross run without DNF get 3,5 points

{"name":"Dresden Quiz #1", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge about the Dresden engineering standards and racing regulations with our engaging quiz! This quiz covers a variety of topics, including vehicle dynamics, safety standards, and performance metrics.15 questions to challenge your understandingMultiple-choice format for easy engagementSee how you rank against other participants","img":"https:/images/course7.png"}