Survey Maker Survey Templates Contact Privacy & Security

Automotive Safety Compliance Quiz

A sleek and modern automotive safety setup, featuring various vehicle safety components and equipment in a clean, well-lit environment, emphasizing compliance and quality in vehicle design.

Automotive Safety Compliance Quiz

Test your knowledge on essential automotive safety standards and regulations! This quiz covers critical aspects of vehicle design, safety equipment, and compliance requirements. See how well you understand the guidelines that keep vehicles and their drivers safe.

Multiple choice questions
Focuses on safety and engineering standards
Validate your expertise in the automotive field

15 Questions4 MinutesCreated by TestingGear421

Which of the following is incorrect

The filler neck opening must be directly accessible without removing any parts of the vehicle

The filler neck must have a fuel filler cap that can withstand severe vibrations or high pressures such as could occur during a vehicle rollover event.

A clear filler neck tube may be used as a sight tube.

High pressure fuel Lines must be rigidly connected every _ by mechanical fasteners to structural engine components.

50 mm

75 mm

100 mm

Which of these is incorrect for the support tube for a member of primary structure if it is a bent tube or made from multiple tubes:

Be of the same dimension as the supported tube(s)

Terminate at the node of chassis

Be angled more than 30° from the plane of supported tube(s)

Which of the following doesn't meet the requirements for a driver's helmet:

Snell K2009

SFI 31.5/2005

FIA 8860-2004

Which of the following is incorrect for VSV

assembled sequences are allowed CORRECT

Driving in a separated or protected area

Must be presented in ready to race condition including body works

must run under its own power

if drivers who have missed attending the drivers briefing for the day will not be allowed to drive the car for

Whole competition

Only for the day and except autocross

Only for that particular day for all events

depends on dynamic event instructor

Low pressure fuel system are those functioning at a pressure

Below 10 bar

below 10 atm

below 15 bar

signal only influencing indicators - indicating a failure

Of its own function

the connected system

Both fo the above

Which of the following are excluded from the LVS voltage limit

Which of teh following are excluded from the LVS voltage limit

High voltage system for injectors

Voltage internal to OEM charging system designed for <60V DC output

All of the above

The maximum sound level test speed for a given engine will be the engine speed that corresponds to an average piston speed of 15.25 m/s. The calculated speed will be rounded to the nearest 500 rpm. The maximum permitted sound level up to this calculated speed is

103 db fast weighing

109 db fast weighing

110 db fast weighing

BOTS ___ consist of a ______connection of switches.

May, parallel

Must , series

May , series

Must , parallel

All moving suspension and steering components and other sharp edges inside the cockpit between the front hoop and a vertical plane __________of the pedals, must be shielded with solid material

25 mm forward

50 mm rearward

100 mm rearward

Any catch can must vent through a hose with internal diameter of ____down to the bottom level of the chassis and must exit outside the bodywork.

Maximum 4mm

Minimum 5mm

Minimum 3mm

The shoulder harness straps must be threaded through the _______ bar adjusters in accordance with the manufacturer’s instructions.

The distance between the centre of the 200mm circle of the percy and the rearmost actuation face of the pedals must be ___________.

Maximum 490mm

Maximum 280mm

Minimum 915mm

Minimum 280mm

{"name":"Automotive Safety Compliance Quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on essential automotive safety standards and regulations! This quiz covers critical aspects of vehicle design, safety equipment, and compliance requirements. See how well you understand the guidelines that keep vehicles and their drivers safe.Multiple choice questionsFocuses on safety and engineering standardsValidate your expertise in the automotive field","img":"https:/images/course6.png"}