Kundi

A futuristic control room with various mission systems interfaces and radar screens, showing a high-tech environment with operators working on advanced mission management systems.

Mission Systems Knowledge Quiz

Test your expertise on mission systems with this comprehensive quiz designed for professionals in the field. Covering essential topics from software applications to ESM capabilities, this quiz aims to enhance your understanding and retention of critical information.

Challenge yourself with multiple-choice questions that delve into:
- Software application management
- Event report accessibility
- System shutdown protocols
- ESM classification capabilities

42 Questions10 MinutesCreated by NavigatingEagle123

Software application which manage the bit function for all CAEW system

MRC

AMC MBIT

SDI

MC2

Which of the following system is not connected to mission system BUS

SPS

CMC

OWS

MCS

Proper PIC shutdown is through

PIC

OWS

CDU

MCS

What is displayed on the hardware map icon

PSS

FSS

PSS & FSS

PSS, FSS, LPF LEVEL

Where can the records of event reports can be accessed

Hardware map

Log Files

PSS

FSS

Where is the servicability of the mission system component displayed

Hardware Map

Log files

CAS

KVM

How is the global erase activated

Erase on OWS1

Erase on OWS3

Erase on any OWS

Erase option on any OWS

During airborne condition, it is impossible to modify, edit or change the ____ File?

ESM PFM

MPD

RDR PFM

GDN PFM

What type of test can be performed when selecting BIT control function in OWS screen?

PWR UP & INITIATE BIT

INITIATE BIT

MAINTENANCE BIT

INITIATE & MAINTENANCE BIT

Who can initiate the whole system shutdown?

Any Operator

Only Mission Commander

Operator using KVM to shutdown MCS

All of the above

GASP is generated by?

Ground C2 centre that transfer it to the CAEW via SATCOM

Ground C2 centre that transfers it to the CAEW via GDN

Fusion of on board sensor data with data received via COM system

Fusion on board sensor data only

For OWS 2,4,5,6 where does the MS normal 28VDC come from?

E1 COLUMN

LEER BOTTOM CB

REER BOTTOM CB

MPDB

For RADAR to go from STNDBY to OPERATE, how long does it take to attain the required power?

11ms

22ms

33ms

44ms

How many GPS satellites are required for aquiring 1PPS signal?

Atleast 4 satellites

Less than 3 satellites

3 satellites are sufficient

1 satellite

What is the input voltage of the TSU

28VDC

220VAC

115VAC

270VDC

The lock to GPS LED on TSU front panel will flicker green when...

A failure occurs during warm up phase

1PPS signal is acquired from less than 4 satellite

External 1PPS is not selected as the syncronization source

Rubidum oscillator is not locked

Which of the following is true about CDU?

Control RADAR functionality

Selection of mission system and SPS information to be displayed on the original display unit and display parameters

Control INS navigation data from aircraft unit

Selection of ESM generated pages

PIC main function is to generate...

Air situation Picture

Self protection suite display

General Status Page

All of the above

What is the function of PIC?

Enable flight crew to control the RADAR weather mode

Generate audio output to the original aircraft

Communicates with DU to recieve flight crew selections and provides selection menu for display

Controll ESM funtionality recording through flight crew selection CDU

The Mission Parameter Data consist of _________ files

Pilots fault list and maintenance fault list

Pre flight messages and tactical mission Data

ESM and RADAR

OWS and MCS

During the post mission, the MSS is used to support _____ and analysis of ESM system recording

Playback

Recording

Operation of AMS

PFM generation

The MSS is able to perform ...

File management

ESM simulation

ESM playback

All of the above

The ESM ENV, ESM ASG, MCS & MSS PC are interconnected by...

Discrete lines

RS422

LAN (ETHERNET)

RS232

The MPD generation process is divided into sub process, Which of the following is the sub processor?

Preparation

Validation

Load file generation

All of the above

OTS ENV unit simulates

Airborne systems

Flight arena

Communication channels

Other C2 aircrafts

The frequency coverage for ESM is

0.5-12

0.5-14

0.5-16

0.5-18

Which of the following is not an ESM main component?

MRX

ESMP

FER

MPU

ESM classification capability is based on?

Data recieved via MC2

Received signal amplitude

Emitter Location

Emitter predefined database

Lobe switching amplitude comparison is used to provide DF for

Pulsed signal

RF signal

CW signal

Video Signal

What will be the output frequency range if the input frequency range of FER is 6.0-10GHz

2.0-6.0

6.0-2.0

5.5-4.0

5.5-1.0

What is the maximum range of LDN

100NM

150NM

200NM

250NM

What is the data communication network of GDN system

Static TDMA

Dynamic TDMA

CDMA

FDMA

Which of the following components is not part of cabin intercom and voice system?

6 UHF transceivers

Digital audio control panal

Modular Radio Cabinet

Extended Digital Audio Control Panel

What is the maximum detection range of the S-Band RADAR

E1 COLUMN

BEHIND S-BAND ANTENNA

A1 COLUMN

S BAND RADAR DOES NOT REQUIRE TRM

If S-Band RADAR CU power supply is faulty, the S-Band RADAR...

Can operate up to range of 50NM

Can operate L-Band CU via RDU

Can provide weather RADAR only

Cannot Operate

How many receive channels are there in each control unit?

Where is the Safe On Transmit switch located?

B2 PDB

B2 COLUMN

E1 PDB

A1 COLUMN

What are the modes of operation for SPS system

OFF, SAFE, NORMAL, BACKUP

OFF, INITIAL, STANDBY, NORMAL

INITIAL, STANDBY, NORMAL, BACKUP

INITIAL, STANDBY, SAFE, NORMAL

SPS system consist of which LRUs

TPU,SPSC, CFDS, & SSU

IFF, SPSC, SSU & CFDS

SPSC, PDCS, SSU & IFF

CFDS, SSU, TPU & ESMP

How many dispensers are ther in CAEW aircraft?

How many states are there in MWS

OFF, INIT & WARMUP, STANDBY & OPERATIONAL

OFF, INIT & WARMUP, NORMAL & AUTOMATIC

OFF, NORMAL, SAFE & BACKUP

OFF, STANDBY, OPERATIONAL AND MAINTENANCE

What are the conditions for dispense chaff/flare?

Master switch in ARM position

Weight On Wheel "OFF'

Safety Pin Out

All of the above

Kundi

Mission Systems Knowledge Quiz

More Quizzes