GEAS COACHING 2

Refers to the reproduction, distribution, performance, and public display of copyright-protected material without the permission of the copyright holder?

____ are goods, including packaging, bearing without authorization a trademark which is identical to the trademark validly registered in respect of such goods, or which cannot be distinguished in its essential aspects from such a trademark

A ____ is a work based on one or more already existing copyrighted works. It includes dramatizations, translations, adaptations, abridgements, arrangements, and other alterations of literary or artistic works, and compilations of data and other materials.

Republic Act strengthening compliance with occupational safety and health standards.

The implementing rules and regulations of RA 11058, entitled “An Act Strengthening Compliance with Occupational Safety and Health Standards”

When was RA 11058 approved?

Refer to any emergency, warning or danger signpost or any safety instruction using the standard colors and sizes, including the standards symbols for safety instructions and warnings in the workplace, prescribed by the DOLE?

Refer to any employee or officer of the company trained by the Department of Labor and Employment (DOLE) and tasked by the employer to implement an occupational safety and health program, and ensure that it is in accordance with the provisions of OSH standards?

Refer to establishment, projects, sites and all other places where work is being undertaken wherein the number of employees, nature of operations, and risk or hazard involved in the business, as determined by the Secretary of Labor and Employment, require compliance with the provisions of RA 11058.

Refer to any person trained and duly certified to administer first aid by the Philippine Red Cross or any organization authorized by the Secretary of Labor and Employment?

Refers to an extermination of the work environment including the location and operation of machinery other than those covered by technical technical safety audits, adequacy of work space, ventilation lightning, conditions of work environment, handling storage of work procedures, protection facilities and other possible sources of safety and health hazards in the workplace.

According to Section 16 of RA 11058, all workers shall undergo the mandatory ____ hours safety and health seminar as required by the DOLE which shall include a portion on joint employer-employee orientation.

Willful failure of an employer to comply with required OSH standards or with a compliance order issued by the Secretary of Labor and Employment shall make such employer liable for an administrative fine not exceeding ___ per day until the violation is corrected

Refer to industry-determined specifications of proficiency required for effective work performance. These are expressed as outcomes with focus on workplace activity rather than training or personal attributes, and the ability to apply new skills in new situations or changing work or organization.

Refers to a workplace wherein the presence of hazard or potential hazard within the company may affect the safety and/or health of workers not only within but also persons outside the premises of the workplace.

Establishments employing less than ten employees, and establishments employing less than one hundred employees respectively?

An employee who has completed the mandatory eight (8)-hour OSH orientation course as prescribed in the OSH standards and two (2)-hour trainers’ training.

Safety Officer 2 (SO2) refers to an employee who has completed the mandatory ____ hours OSH training course as prescribed in the OSH standards

Safety Officer 3(SO3) refers to an employee who has completed the mandatory 40-hour OSH training course, additional 48 hours of advanced/specialized occupational safety training course, and relevant experience in OSH for at least ____ year/s and other requirements as prescribed in the OSH standards.

Safety Officer 4(SO4) should complete the mandatory 40-hour OSH training course, additional 80 hours of advanced occupational safety training course relevant to the industry, an aggregate of 320 hours of OSH related training or experience, an actual experience as SO3 for at least ___ year/s.

What is the minimum number of safety officer/s needed in a low-risk workplace with less than 50 workers?

What is the minimum number of safety officer/s needed for a medium-risk workplace with 10 to 99 workers?

What is the minimum of safety officer/s needed for a high-risk workplace with 10 to 50 workers?

A workplace with hazards having a low probability to results in accident, harm, or injury?

Refers to a workplace where there is a moderate exposure to safety and health hazards.

Aside from 2 part-timers nurses, how many firstaider/s are needed in medium and high-risk workplace with less than 100 workers?

For low-risk workplaces, at least how many workers are needed that requires the workplace the services of a part-time physician?

For medium and high-risk workplaces, at least how many workers are needed that requires the workplace the services of a part-time physician?

For low-risk workplaces, at least how many workers are needed that requires the workplace the services of a full-time dentist?

For medium and high-risk workplaces, at least how many workers are needed that requires the workplace the services of a full-time dentist?

According to the IRR of RA 11058, the employer may not establish a hospital or dental clinic in the workplace where there is a hospital or dental clinic located not more than ___ kilometres away from the workplace, accessible in not more than 25 minutes travel time.

According to the IRR of RA 11058, an OH physician must undergo at least ___ hours basic OSH training course for physicians.

According to the IRR of RA 11058, an OH nurse must undergo at least ___ hours basic OSH training course for nurses.

Color for fire protection equipment apparatus and facilities according to the OSH standards?

Color is used to designate radiation hazards?

Color used to designate dangerous parts of machines or energized equipment which may cut, crush, shock, or inure?

Color used to designate caution and for marking physical hazards, such as striking against, stumbling, falling, and tripping.

Often used in combination with black, this color is the standard color in OSH to designate traffic and housekeeping marking.

Fire Protection and Control is found in Rule ___ of the OSH Standards of DOLE.

Refers to the time duration that a material can withstand a standard fire exposure test.

Refers to the minimum temperature at which a material will give off flammable vapour.

According to OSH standards, at least 2 exits shall be provided in every floor and basement of every workplace capable of clearing the work area in ___ minutes

Fire hazards featuring combustible and flammable materials like wood, cloth, paper, rubber, and other similar ordinary materials.

Fire hazards such as flammable liquids & gases.

Fire hazards featuring combustible metals such as magnesium, titanium, sodium, and other metal hazards.

Fire hazards which involve energized electrical equipment where the electrical non-conductivity of the extinguisher is important

Electrical safety is found in Rule ___ of the DOLE OSH standards.

The condition where there is no excess time between activities is called:

Refers to the main elements of a project life cycle. For engineering and construction projects, typically include preplanning, design, procurement, construction, start-up, operation and final disposition?

The authorized representative of the engineer who is assigned to the site or any or any part thereof whose duties are ordinarily set forth in the contract documents and/or the engineer’s agreement with the owner is called ____.

What is defined as having little or no risk tolerance?

What refers to a risk impact measure or indicator beyond which a risk response must be planned, or a contingent response must be taken?

What refers to the ability or willingness of an asset or project stakeholder to accept potential risk impacts?

What refers to a process for managing assets and project risk?

Any unique physical or intellectual property that is of long term or on-going value to the enterprise is called ____. This commonly includes capital or fixed assets but may include intangible assets.

In earned value, what refers to a technique to earn budget based on assignment of budget equally across accounting months?

Risks that are identified, but for which no other risk response is taken in the risk treatment process (e.g. avoid, reduce, transfer)

A method of evaluating projects or investments by comparing the present value or annual value of expected benefits to the present value or annual value of expected costs?

A bond covering a group of persons, articles or properties is called ____.

A rate at which resources such as funds or man-hours are or were being expended on a project?

What refers to a planning technique in which team members interact to create a project strategy tactical approach and resulting network by locating and interconnecting task cards using walls as the work space?

A technical and administrative activities concerned with the creation, maintenance and controlled changes of configuration throughout the life of the product. This is an integral part of life-cycle management.

The results will be equal to or more favourable than the amount estimated or quoted is referred to as ___.

Which of the following statements define Environmental Engineering?

Which of the following statements is/are types of pollution that affect the environment?

Which statement means water vapour?

Which of the following statements define environmental chemistry?

Why carbon dioxide is called a greenhouse gas?

Which of the following is a renewable source of energy?

Which is the first zone of purification in a sand bed?

What does the phrase “anthropogenic CO2 emissions” mean?

Which process of water treatment is done to avoid floating debris, branches, tress, or other large particles suspended in water?

Which of the following compounds was earlier produced for the utility of transformers?

When Environmental Lapse Rate (ELR) is greater than Adiabatic Lapse Rate (ALR), then which of the following occurs?

Which of the following is NOT a primary pollutant?

Which of the following plants is extremely sensitive towards sulphur dioxide?

In which of the following process earthworms decompose biodegradable solid waste?

Which of the mentioned devices are used for removing vapour phase/gaseous pollutants?

Which of the following is biodegradable waste?

Which of the following water treatment process is done after filtration of water?

Which of the following type of pollution is Cultural eutrophication?

In the lower layers of atmosphere, what range of wavelengths of light is predominant?

Which of the following radiations of the sun do greenhouse gases trap?

Which of the following air pollution control device has maximum efficiency?

Which of the following is not a part of photochemical smog?

Which of the following device is used to prevent the clogging of sewer pipes?

Which of the following factor does not effect the dry weather flow?

Which of the following gas is not colorless?

Which of the following is an advantage of a separate water carriage system?

Which of the following flow is also called sanitary sewage?

Which of the following greenhouse gas is contributed by cattle farming?

The business plan should be prepared by:

A patent is granted for a specified amount of time because of the assumption:

Which of the following is a debit entry to a partner’s current account?

Salaries paid to partners is an:

Which business entity is considered as a “legal person” in the eye of law?

The correct form of accounting equation is

In the Philippines, the Environmental Impact Assessment (EIA) process is implemented by the ___.

What law covers the Environmental Impact Assessment in the Philippines?

The “magic numbers” for atoms are:

RATE IT BABY!