Module 7
Conduit Bending Skills Quiz
Test your knowledge and skills in conduit bending with this informative quiz! Ideal for electrical professionals, students, and anyone interested in mastering the art of conduit installation.
Explore various topics including:
- Tools and techniques
- Mathematical calculations
- Types of bends and their applications
- Proper conduit handling
Which of the following should be used to cut conduit?
Hand saw
Hacksaw
Table saw
Chop saw
A die is used to _____.
Cut threads in conduit
Bend segments of conduit
Smooth the inside edge of conduit
Cut RMC and IMC
Which of the following eliminates wrinkling or flattening when bending PVC?
A hickey
A die
A reamer
A plug set
The radius of a circle is defined as _____.
The length from one edge of the circle to the other edge through the center point
. The distance around the circle
The distance from the center point to the edge of the circle
A closed curved line whose points are all the same distance from its center
Which of the following is used to bend IMC?
A reamer
A hickey
A die
A hacksaw
A damp sponge or cloth can be used to set bends in _____.
RMC
IMC
PVC
EMT
The formula π ×D is used to calculate _____.
Diameter
Circumference
Radius
Surface area
Two junction boxes are each located on different walls, 12 inches from the same corner. Given a 90° bend with a take-up of 6 inches and a gain of 2-1/4 inches, what is the developed length of the conduit between them?
8-1/4 inches
10-3/4 inches
18-7/8 inches
21-3/4 inches
Two 90° bends in the same piece of conduit are required for a(n) _____.
Offset bend
Back-to-back bend
Saddle bend
Parallel bend
When creating an offset using 10° bends to cross a 6-inch obstruction, the distance between bends is _____.
12 inches
24 inches
36 inches
42 inches
One purpose of an offset bend is to _____.
Bend smaller-size conduit
Change direction
Go around an inside corner
. Ensure the conduit enters straight into the junction box
The purpose of a saddle bend is to _____.
Go around obstructions
Bend smaller-size conduit
Go around an inside corner
Ensure the conduit enters straight into the junction box
Which of the following describes circumference?
The area of one of four quadrants of a circle
The distance around a circle
The distance from the center point of a circle to the edge
The distance from one edge of a circle to the other
A reamer is used to _____.
Go around obstructions
Smooth the sharp inside edge of metal conduit after it has been cut
Cut RMC and IMC
Thread conduit so that it can be properly joined
A right triangle is any triangle with _____.
Two equal sides
Three equal sides
One 90° angle
One 45° angle
{"name":"Module 7", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge and skills in conduit bending with this informative quiz! Ideal for electrical professionals, students, and anyone interested in mastering the art of conduit installation.Explore various topics including:Tools and techniquesMathematical calculationsTypes of bends and their applicationsProper conduit handling","img":"https:/images/course8.png"}
More Surveys
Make your own Survey
- it's free to start.
- it's free to start.