Q1
Vehicle Safety and Compliance Quiz
Test your knowledge on vehicle safety regulations and technical specifications with our engaging quiz. This quiz covers various key aspects related to vehicle integrity, components, and compliance standards.
- Multiple choice questions
- Improve your understanding of vehicle regulations
- Ideal for engineering students and automotive enthusiasts
The IA assembly, when mounted on the front of a vehicle with a total mass of _______ and impacting a solid, non-yielding impact barrier with a velocity of impact of _________.
310 kg and 7 m/s
300 kg and 7 m/s
300 kg and 7 cm/s
300 kg and 9 m/s
Vehicles with aerodynamic devices and/or sensors in front of the front bulkhead must not exceed the peak deceleration of T3.19.1 for the combination of their IA assembly and the non-crushable object(s).
True
False
Any harness attachment to a monocoque must be using one 10 mm metric grade 8.8 bolt or two 8 mm metric grade 8.8 bolts (or bolts of an equivalent norm) and steel backing plates with a minimum thickness of _____________ .
1mm
2 mm
3mm
1.5mm
Pass-throughs for wiring, cables, etc. Are permitted if grommets are used to seal the pass-through
True
False
The centerline of the lap belt at the seat bottom should be between 0 mm to _____ forward of the seat back to seat bottom junction
75 mm
77 mm
76 mm
80 mm
If a vehicle stalls before passing the finish line and cannot restart without external assistance, the vehicle is DQ for that run.
True
False
For efficiency scoring, the consumed fuel volume does not exceed_____________ .
15kg/100 km 91 Octane
10kg/100 km 91 Octane
15kg/100 km 95 Octane
15kg/100 km 100 Octane
To detect hard braking, a brake system pressure sensor must be used. The threshold must be chosen such that there are no locked wheels and the brake pressure is less than or equal to ______.
20 bar
30 bar
40 bar
10 bar
LV batteries must be securely attached to the chassis and located within the surface protection envelope
True
False
The maximum allowable internal diameter of the intake runner system between the restrictor and throttle body is 60 mm diameter, or the equivalent area of ________ if non-circular.
2827 mm2
2727 mm2
2828 mm2
2827 cm2
All fuel vent lines must exit outside the bodywork.
True
False
Software calibration changes are prohibited after TI .
True
False
In side view any portion of the brake system that is mounted on the sprung part of the vehicle must project below the lower surface of the chassis.
True
False
Penalty for incorrect EDP link within ED supporting docs is___________.
10 points
5 points
0 to 5 points
None of the given option
DI stands for ______
Dual Injection
Direct Injection
Digital Interface
Distribution Interface
{"name":"Q1", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on vehicle safety regulations and technical specifications with our engaging quiz. This quiz covers various key aspects related to vehicle integrity, components, and compliance standards.Multiple choice questionsImprove your understanding of vehicle regulationsIdeal for engineering students and automotive enthusiasts","img":"https:/images/course4.png"}
More Quizzes
QUIZZELLA 2
15810
FAR QUIZ
15816
***What in the World? Weekly Quiz" - Sep 30-Oct 6, 2019***
1050
How Well Do You Know the Guardians Actors and Actresses?
940
Master Crucial Conversations: Chapter 6 Challenge
201031460
Free Trắc Nghiệm Chương 2 Kinh Tế Chính Trị Mác
201026720
Test Your Skills: 7 English Grammar for Class 7
201070575
Test Your Skills: Free Pythagorean on Right Triangles
201027251
Free Insulin Administration Competency
201021726
Think You're a Cell Division Pro? Take This Free MCQ!
201039488
Ecology & Environmental Sustainability
15829335
Free Vehicle Jump-Start Safety
201030711