Survey Maker Survey Templates Contact Privacy & Security

Inspection Midterm

What is the allowable tolerance for the due date of an annual inspection?

The end of the same calendar month that the inspection is due

The end of the next business day of the actual due date

There is no tolerance on the annual inspection; it must be completed by the end of the actual due date.

10% or 30 days, whichever comes along first

Complete the following sentence: No person shall conduct a takeoff in an aircraft unless the aircraft is maintained in accordance with ...

A maintenance schedule of another operator that operates the same type of aircraft (CARs 591).

The manufacturer's prescribed maintenance procedures.

The maintenance schedule of the country in which the aircraft was manufactured.

A maintenance schedule that conforms to the 'Aircraft Equipment & Maintenance Standards' (CARs 625).

How often must an altimeter be tested and calibrated?

Every 6 months

Every 12 months

Every 24 months

IAW manufacturer's recommendations

Which of the following would NOT constitute an inspection after an abnormal occurrence?

Bird strike

Lightning strike

Maintenance strike

ADG or RAT deployment

Who issues Airworthiness Directives (ADs)?

The manufacturer of the aircraft

The owner/operator of the aircraft in liaison with the manufacturer

The Minister or civil aviation authority responsible for an aeronautical product type design

The owner/operator of the aircraft

Who is responsible for the scheduling and completion of inspections for a Canadian registered aircraft?

The owner/operator of the aircraft

The operating pilot(s) of the outbound flight after maintenance has been completed

The Minister or civil aviation authority responsible for an aeronautical product type design

The manufacturer of the aircraft

How often must a cockpit voice recorder 'function' check be carried out?

Prior to every departure

IAW manufacturer's instructions

6,000 hours or 24 months, whichever is first

Every 3,000 hours or 12 months, whichever is first

Who is responsible for the completion of ADs (airworthiness directives)?

The licensed maintenance technician

The owner/operator of the aircraft

Transport Canada

Which section of the CARs identifies the scope of the annual inspection for small aircraft?

CARs 571.10 - Appendix C

CARs 605.85

CARs 625.86 - Appendix A

CAR 625.86 - Appendix B

When must a small privately owned aircraft piston engine be overhauled?

There is no mandate in accordance with CARs

As per the manufacturer's recommendations 

Every 5 years

Every 10 years

When is the best time to conduct an inspection?

When the aircraft arrives

Just prior to departure

During a scheduled inspection

Anytime you are in contact with the aircraft

Which inspection program will a large M1 and/or small M2 category aircraft commonly use?

Annual inspection

Letter checks

Phase inspection

Periodic inspection (100 hour inspection)

Which form must be completed when applying for a change to the inspection schedule of an aircraft component?

Appendix A - Small Aircraft Maintenance Schedule Approval

Appendix B - Large Aircraft Maintenance Schedule Approval

Appendix C - Maintenance Schedule Amendment Request

Appendix G - Large Aircraft Maintenance Amendment Request

What is the allowable tolerance for the due date of an annual inspection?

The end of the same calendar month that the inspection is due 

�The end of the next business day of the actual due date

The last day of the scheduled calendar month

10% or 30 days, whichever comes along first

Complete this sentence: An operator that is applying for an approved inspection program will submit the request ...

To the Minister, once it is establish that another operator has successfully operate the same aircraft type using the requested maintenance schedule format

Directly to the regulatory authority located in the country where the aircraft was manufactured

Directly to the Minister in Ottawa

To the Minister, through the local Transport Canada office that has jurisdiction over where the operator is located

Identify the inspection schedule that would normally be used by a private operator of a Cessna 172 aircraft used for pleasure.

CARs 625.86 Appendix B & C, accomplished every 100 hours

CARs 625.86 Appendix C & D, accomplished every 12 months

CARs 625.86 Appendix B & C, accomplished every 12 months

CARs 571,10 Appendix C & D, determined by the program that is approved by the Minister

Which answer describes a progressive inspection program?

A complete inspection of a small aircraft carried out in various stages over a 12 month cycle

A complete inspection carried out on any small aircraft every 12 months 

A complete inspection completed on commercially operated small aircraft every 12 months

A complete inspection of a non-commercially operated small aircraft carried out every 12 months

Complete the following sentence: A periodic inspection is normally based on intervals of ...

Hours

Cycles

Nautical miles flown

The age of the aircraft

Which of the following would you carry out to prepare for an aircraft arrival on the line

Get the 'big picture.'

Ensure servicing equipment and maintenance vehicles are stocked.

Acquire as much information as possible ahead of time regarding the aircraft maintenance status.

All of the above

What is the first course of action when the aircraft initially arrives at the gate?

Service the engine oil.

Speak with the fueling person to determine the fuel required for the outbound flight.

Commence with the walk-around.

Ground and chock the aircraft.

What is the procedure for an open entry (snag) in the log book?

It must be repaired prior to departure or the aircraft is grounded.

The snag can remain open as long it is not an airworthy item.

The snag must be fixed or deferred.

All logbook snags can be deferred.

Why is it imperative to establish communication with the flight crew upon arrival?

Establish how much engine oil is required for servicing

Determine the fuel required for the outbound flight

Find out what parts are required for any snags

Gather information to aid in troubleshooting

Why is it recommended to gather as much information as possible about the maintenance status of the aircraft prior to arrival?

To initiate troubleshooting and have parts ready for arrival, as required

To be better prepared in order to minimize the risk of a potential delay

To determine if any additional ground support equipment may be required for the arrival

All the above are correct.

What is the overhaul schedule (TBO) for turbine engines on corporate aircraft?

As per the manufacturer's recommendations

2,000 flight hours

Every 5 years

5,000 flight hours

When must a small privately owned aircraft piston engine be overhauled?

There is no mandate in accordance with CARs

As per the manufacturer's recommendations

Every 5 years

Every 10 years

How often must a commercial operator of a small aircraft, using a periodic inspection schedule, comply with Appendix B and the applicable items of Appendix C?

Every 3 months

Every 6 months

Every 12 months

Every 100 hours or 12 months, whichever occurs first

For the purpose of reducing down time for maintenance, what inspection format will operators of large aircraft use?

Periodic Inspection

Phased Check

Progressive Inspection

Nothing; they just keep flying

Which form must be submitted by a commercial operator applying for an approved inspection program for a small aircraft type?

Appendix A

Appendix B

Appendix C

Their appendix and a kidney

Identify the form that must be completed by an operator requesting a component inspection schedule change.

Appendix A

Appendix B

Appendix C

A component inspection modification form

Which form must be completed by an operator applying for an approved inspection program for its Airbus A-320 aircraft fleet?

Appendix A - Small Aircraft Maintenance Schedule Approval

Appendix B - Large Aircraft Maintenance Schedule Approval

Appendix C - General Aircraft Maintenance Schedule Approval

Appendix G - Large Aircraft Maintenance Amendment Request

Select the correct application form that would be required for a commercial operator of small M1 aircraft requesting an approved inspection program?

Appendix A - Small Aircraft Maintenance Schedule Approval

Appendix C - Small Aircraft Maintenance Schedule Approval

Appendix A - Large Aircraft Maintenance Schedule Approval

Appendix C - Maintenance Schedule Amendment Request

Where would you find all maintenance scheduling requirements?

The aircraft general inspection and servicing manual

CARs 591

CARs 625.86

CARs 571, Appendix K

How often must Appendix B be complied with?

Every 3 months

Every 6 months

Every 12 months

Every 50 hours

How often must a turbine engine be overhauled?

Every 1,000 flight hours

Every 2,000 flight hours

IAW the manufacturer

At the owner/operator discretion, as it is not mandated by CARs

How often must a standby compass be calibrated?

Annually

Every 5 years

IAW the manufacturer

Every 1,000 flight hours

What is the interval for a double-acting piston engine propeller overhaul?

Annually

Every 5 years

Every 2,000 hours or 10 years, whichever is first

Every 5,000 hours or 5 years, whichever is first

If while performing annual inspection I carried out a compass swing. Which of the following regulations below would be applicable?

An annual inspection as per CARS 625.86 Appendix B only

An annual inspection as per CARS 625.86 Appendix C only

An annual inspection as per CARS 625.86 Appendix A

An annual inspection as per CARS 625.86 Appendix B & C

Which of the following statements is correct?

The maintenance work listed in this entry has been performed in accordance with the applicable standards of airworthiness

The described maintenance has been performed in accordance with the applicable requirements/standards of airworthiness

The maintenance certified in this logbook has been carried out in accordance with CARS 634.96

I certify that the aircraft is fit for flight and that all the discrepancies have been rectified.

On a Canadian registered aircraft I am going to perform an annual inspection. Which of the following regulations apply?

An annual inspection as per CARS 625.86 Appendix B only

An annual inspection as per CARS 625.86 Appendix C only

An annual inspection as per CARS 625.86 Appendix A

An annual inspection as per CARS 625.86 Appendix B & C

When must a pre-departure check be completed on a large transport category aircraft?

It is a flight crew function only

Within 24 hours

Within 2 hours of departure

As soon as the aircraft arrives from a flight

No person shall conduct a takeoff on an aircraft that has undergone maintenance unless ...

The maintenance has been certified by signing a maintenance release - CARs 605.85

A flight test has been conducted to determine serviceability of the aircraft

The maintenance has been certified by signing a certificate of airworthiness

All recorded defects have been repaired

How to identify aviators oxygen and nitrogen bottles?

The ID sticker or regulator

What is Appendix D in CARs 625.86

Annual

Elementary Maintenance

Approved maintenance programs

Out of phase

Complete the following sentence: A progressive inspection is normally based on intervals of ...

Zone

Cycles

Nautical miles flown

The age of the aircraft

Where in the Canadian Aviation Regulations can you find guidance for inspections after a hard landing?

Standard 625.86 Appendix H

CAR 425.88 Appendix G

CAR 625.88 Appendix G

CAR 605.88 Appendix G

Which of the following is a more significant potential distraction for maintenance personnel working on an aircraft?

Following the maintenance manual step-by-step

Double-checking the torque specifications

Wearing headphones to listen to music

Engaging in a conversation with a colleague about non-work-related topics

Which of the following situations best illustrates a lack of assertiveness in aircraft maintenance?

Deciding not to report a potential safety concern to avoid inconvenience

Reporting a minor issue to the supervisor promptly

Seeking clarification from a more experienced colleague on a complex task

Taking the initiative to double-check completed maintenance tasks before closing them

An operational check of the Cockpit Voice Recorder (CVR) shall be performed, in accordance with the manufacturer's instructions, as follows:

Bt maintenance personnel during each line check and following any system maintenance

Upon installation only

Every 24 months or 3000 hours

Survival and emergency equipment shall be overhauled at the intervals recommended by the manufacturer

Westjet's Dreamliner 787 requires a "B check" inspection. How can the company limit the amount of down time this check could cause?

Carry out the "B-check" efficiently

B check is the same as "625 B & C"

Carrying out sections of the "B-Check" in phases, while the aircraft is stopping for the "A-Check" inspections

Limiting down time sound a "you" problem

When looking at the previous years annual inspection logbook entry (2023), you notice the pitot static certification was carried out that year (2023). When is the pitot static certification next due?

2025

2024

Every 5 years

2026

What standard and appendix within the CARs outlines the scope of an annual inspection?

Std 625.86 - Appendix B & C

Std 625.85 - Appendix B

Std 625.88 - Appendix B

Std 625.84 - Appendix B

A customer who keeps their aircraft privately registered has just upgraded from a unpressurized piston powered aircraft to a pressurized turboprop aircraft. Can they continue using the same Std 625 App B & C inspection shchedule?

Yes, pressurized turboprop aircraft can follow the std 625 B&C schedule with the Ministers Pre-approval

Dunno, I would have to as the boss

No, the customer would have to submit a developed inspection schedule to the Minister following the guidance in Std 625 App D

Yes, privately owned pressurized turboprop aircraft follow the same inspection schedules as Privately owned piston aircraft.

If I had a commercial registered aircraft and I wanted to apply an extention what document would I refer to?

The Cessna maintenance manual chapter 5

The CARS 625.86 Appendix C

The MSA maintenance Schedule approval

Call the transport Canada office and ask for the inspection department.

Part of inspection phased?

Pre-inspection

Examination

Service & Repair

Functional Check

Return to Service

Progressive inspection

Larger aircraft like Air canada

Balloon

Small aircraft

Non-small aircraft

What is the tolerance for 100 hour inspection?

10% (100)

10% whichever comes first

No tolerance

Which one is not included in inspection?

Pre-inspection

Examination

Functional check

Data collecting

Which is Not included in Pre-inspection?

Aircraft type certificate data sheet

Emergency Crew book

Manufacturer technical publication

Aircraft logbook

{"name":"Inspection Midterm", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"What is the allowable tolerance for the due date of an annual inspection?, Complete the following sentence: No person shall conduct a takeoff in an aircraft unless the aircraft is maintained in accordance with ..., How often must an altimeter be tested and calibrated?","img":"https://www.quiz-maker.com/3012/images/ogquiz.png"}