2103 Quiz
Microcontroller Interrupts and Keypad Quiz
Test your knowledge on microcontroller interrupts, push-button fun
- Multiple choice and checkbox questions
- Explore concepts related to MSP430 microcontrollers
- Perfect for self-assessment and learning
To determine which input port pin requested an interrupt, you can check which bits are set in the interrupt flag register (PxIFG) within your ISR. Is there also another way to do it?
Yes, by checking the value of the interrupt enable register (PxIE)
Yes, by checking the value of the interrupt vector register (PxIV)
No, checking the PxIFG is the only possibility.
Yes, by checking the value of the input register (PxIN)
Consider a push-button with an external pull-down resistor connected to pin P2.0. Which TWO of the following statements are true?
The push button is active-high.
The push button is active-low.
P2.0 is 1 when push-button is NOT pressed.
P2.0 is 0 when the push-button is NOT pressed.
For a smooth key pressing experience on the keypad, your program uses a scanning frequency of ca. 50 Hz (scans per seconds). What would be the result of increasing this frequency, for instance, to 3000 Hz?
It will result in a reduced power consumption, since key pressed can be read faster.
It will result in a higher power consumption, since the program size will be larger.
It will allow multiple keypresses to be identified.
It will result in a higher power consumption, since more instructions per second are executed.
An active-low push button is connected to pin P2.0. Which instruction causes the MCU to wait until the button is pressed?
While(P2IN & 0x01 == 0x01);
While(P2OUT|0x00==0x01);
While(P2OUT&0x00==0x01);
While(P2IN|0x01==0x01);
What is the result for c in the following code segment? Signed char c = 120; c += 10;
C = 130
C = -130
C = -3
C = -126
You enabled the internal pull-up/down resistor for input pin P2.7 in the P2REN register. What is the command to enable the pull-up option for the corresponding pin?
P2SEL |= BIT7;
P2IN |= BIT7;
P2OUT |= BIT7;
P2REN |= BIT7;
The interrupt edge select register (PxIES) allows to assert an interrupt either on the rising or on the falling edge. Is there a way to assert an interrupt on both edges (rising and falling)?
Yes, by toggling the corresponding PxIES bit inside the interrupt service routine(ISR).
No, because after each interrupt occurance the GIE flag must be manually set again.
No, because an interrupt is only allowed to occur either on the rising or on the falling edge.
Yes, by toggling the corresponding PxIFG bit inside the interrupt service routine (ISR).
Don't have the question
Answer is C though
Is it possible to change the interrupt priorities of the MSP430 Port1 pins?
No, it's only possible for Port 2
Yes, by using P1ES register.
Yes, by using P1SEL register.
No, interrupt priorities are fixed.
You have 4 push-buttons connected to the input pins P1.0, P2.0, P2.1, P2.2. All buttons should trigger interrupts. How many separate Interrupt Service Routines (ISRs) does your code require for this?
4
1
2
3
What is the highest number that can be represented by a sign char variable?
255
127
128
256
What is the result for c in the following code segment? Unsigned char c = 0x88; c ^= 0x77;
C = 0x00
C = 0x88
C = 0xFF
C = 0x77
Recall how the keypad is connected to the MSP430 in the Lab (rows connected to output pins, columns connected to input pins). Does this connection allow the scanning algorithm to detect more than one pressed key?
No, it is not possible.
Yes, regardless which keys are pressed.
Yes, but only if the pressed keys are in the same column.
Yes, but only if the pressed keys are in the same row.
An active-low LED is connected to pin P8.4. Which instruction will turn-off the LED?
P8OUT |= 0x04;
P8OUT &= ~(0x10);
P8OUT |= 0x10;
P8OUT &= ~(0x04);
What is the result for c in the following code segment? Unsigned char c = 0xF7; c |= 0x0F;
C = 0xFF
C = 0xF0
C = 0x00
C = 0x07
{"name":"2103 Quiz", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on microcontroller interrupts, push-button functionality, and keypad scanning techniques with this engaging quiz! Ideal for electronics enthusiasts and students alike.Multiple choice and checkbox questionsExplore concepts related to MSP430 microcontrollersPerfect for self-assessment and learning","img":"https:/images/course8.png"}
More Surveys
Mivane
8418
Subject Preferences
3230
Do you know what Mechatronics is?
10520
Feedback form Competitive Programming
6330
Universidad de las Américas
Facultad de Medicina
T E S I S
Prevalencia de Síntomas Depresivos en Estudiantes de 7o Semestre de Licenciatura en Medicina, Universidad de las Américas, San Andrés Cholula, Puebla.
Cuestionario sobre la Salud del Paciente – 9 (PHQ-9) Indistinto.
“A continuación se presentan unas preguntas para evaluar su estado de ánimo, por favor tome en cuenta como se ha sentido únicamente durante las últimas dos semanas y conteste de acuerdo con lo siguiente:”
Ø Ningún día
Ø Varios días
Ø Más de la mitad de los días
Ø Casi todos los días.
1050
Team 1 tea club
740
ELA Curriculum
100
Welke liedjes moet de band spelen
210
Make your own Survey
- it's free to start.
- it's free to start.