Survey Maker Survey Templates Contact Privacy & Security

DV015

An automotive engineer analyzing technical specifications with diagrams and equipment in a workshop setting, focused on vehicle technology and systems.

Technical Specifications Quiz

Test your knowledge on technical specifications and performance metrics with our engaging quiz. Challenge yourself with questions focused on electrical systems, vehicle dynamics, and technical regulations.

Key features of the quiz:

8 multiple-choice questions
Focus on real-world applications
Designed for engineering and automotive enthusiasts

8 Questions2 MinutesCreated by TestingTech101

Which statement is false?

A green indicator light in the cockpit that is easily visible with “TS off” must light up if the TS is deactivated.

Signals influencing the TSAL and the indicator are SCS

The TSAL must be designed, that a single point of failure will not show a deactivated TS.

If an TS accumulator container is removed from the vehicle, a device must be used which logically replaces the TSAL parts inside the accumulator container.

The voltage outside of the TS accumulator must at least be measured by two means independently.

The driver must be able to activate and deactivate the TS, from within the cockpit without the assistance of any other person.

The ready-to-drive sound level must be a minimum of 70 dBA and a maximum of 80 dBA, fast weighting.

The TSAL and all needed circuitry must be hard wired electronics. Software control is not permitted.

The electrical department needs to calculat an low pass filter for the analogous signal of the brake system pressure sensor. The layout of the low pass filter is shown in the picture below. The sampling time is 1,14ms. Which couple of R and L values are wrong due to the alias effect.

R= 200 ohm; L= 0,14H

R= 420 ohm; L= 0,172H

R= 220 ohm; L= 0,076H

R= 200 ohm; L= 0,212H

Other

Please Specify:

Due to the Faculty Advisor a resonant circuit is needed in the already existing electrical concept. To do so, Dave calculated with the resonant circuit equation a needed overall capacity of 45µF. In his calculations he used a capacity loss of Cs = 34µF. Which of the giving examples were used as values for the missing capacities when the capacities are identical.

22 µF

23 µF

36 µF

26 µF

Other

Please Specify:

Alberto is arguing heavily during the competition with an scrutineer about the Quick Jack. What could happen?

25 point penalty for the team.

The whole team is eliminated of the competition.

Alberto is eliminated as a team member.

This is considered a violation of intent.

A ball of 100g falls from a height of 5 meters. On the impact, 30% of the kinetic energy is lost. How high does the ball bounce?(Answer in m; 3 decimals)

Skip

Other

Please Specify:

Regarding the image, which will be the value of Ma and Fv?

Skip

Other

Please Specify:

What is the typical value of an undercut f, on a type E gear of 20mm diameter shaft?

Skip

Other

Please Specify:

Your team drove an endurance time of 1540s. You hit 7 Doo´s, and 2 OC´s . The best team Hit 5 Doo´s and 1 OC. You achieved an endurance score of 280,7482. What is the endurance time of the fastest team excluding the penalties?

Skip

Other

Please Specify:

{"name":"DV015", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on technical specifications and performance metrics with our engaging quiz. Challenge yourself with questions focused on electrical systems, vehicle dynamics, and technical regulations.Key features of the quiz:8 multiple-choice questionsFocus on real-world applicationsDesigned for engineering and automotive enthusiasts","img":"https:/images/course1.png"}