FE REVIEWER 2

Field office and living quarters shall be constructed within ___ months upon the commencement of the Works.

Field Office and other facilities provided by the contractor shall be within the ___ radius or preferably near the job site.

Based on survey and staking requirements, when the centerline horizontal curve radius is less than or equal to 150m and vertical parabolic curve radius is less than or equal to 100m, cross-sections shall be taken at a maximum centerline spacing of ___.

Based on Survey and Staking requirements, when the centerline horizontal curve radius is greater than 150m and vertical parabolic curve radius is greater than 100m, cross-sections shall be taken at a maximum centerline spacing of ___.

If the slag is used in structural concrete, its density shall not be less than ___.

Fly Ash, if specified or permitted as a mineral admixture, it shall not exceed __ partial replacement of Portland Cement in concrete mix.

What is the maximum stacking layer of cement if the storage period is more than 60 days?

What is the maximum stacking layer of cement if the storage period is less than 60 days?

For timber forms, it is important that the moisture content of the timber that will be used to make the formwork in between ___(ME march 2023 Exam).

What is the minimum thickness used for metal forms or of such thickness that the forms remain true to shape?

What is the minimum wall thickness of structural steel tubes used as support for forms?

What is the minimum slump of Lean concrete?

All scaffolding and shoring shall be capable of supporting at least ___ the designed working loads

No scaffolding and shoring shall be erected to exceed __ without written permission from the DPWH Engineer

What is the minimum dimension of Elevators? IRR of BP 344

What is the maximum height of water closet? IRR of BP 344

What is the maximum height of flush control of the water closer? IRR of BP 344

Rock shall be excavated to a depth of __ below the subgrade within the limits of the roadbed.

What is the maximum abrasion loss in mass percent of Gravel fill to be considered as suitable embankment material?

Specific gravity of suitable rock fill embankment shall be above ___.

Embankment of earth shall be placed in horizontal layers not exceeding ____.

When embankment dimensions are less than ___, the DPWH engineer may waive the construction compaction trials

Samples of the fine and coarse aggregates to be used shall be selected by the DPWH Engineer for tests at least ___ before the actual correcting operations shall begin.

Storage buildings shall have capacity for storage of a sufficient quantity of cement to allow sampling at least _ before the cement is to be used

When mixing concrete in trucks, what is the minimum mixing speed in revolution per minute(rpm)?

When mixing concrete in trucks, what is the maximum mixing speed in revolution per minute? (RPM)?

When placing concrete by pumping, what is the minimum discharge capacity of the equipment?

When placing concrete by pumping what is the maximum discharge capacity of the equipment?

When placing concrete by pumping, what is the minimum pressure capacity of rh

When placing concrete in the water what is the minimum diameter of the tremie tube? (PAST ME EXAM)

This the slump to be maintained when placing concrete in water.

What is the minimum cement content of concrete Class Seal?

The concrete in wall, beams, columns, and the like shall be placed in horizontal layers not more than __ thick.

High Strength alloy steel bar for post-tensioning shall be proof stress to ___ of the granted tensile strenght

What is the minimum distance between reinforcing steel bars?

Lap splices shall not be permitted for bars large than __

The overlapping of Bar Mat shall not be less than ___ in width

What is the maximum engine capacity of the motorized banca if provided in the project contract (vehicle)?

If pick up type service vehicle is provided in the project contract, the engine displacement shall not exceed ___ for gasoline and 3,000 L for diesel and/or shall not have an engine exceeding 4 cylinders.

What is the maximum transverse spacing between stakes?

When the centerline horizontal curve radius is greater than 150m and vertical parabolic curve radius is greater than 100m, the maximum distance between centerline points shall be ___.

No other billboards shall be allowed to be installed ___ before and ____ after all DPWH projects and in-between the projects limits or within the road right-of-way.

At least how many days the Alternate traffic control plans should be submitted before intended use?

Where structures are to be founded directly on rock, the length of rock core should be not less than __ & extended further if the use of socketed piles or drilled shafts are anticipated.

For retaining walls more than 30m in length, the spacing between borings should be no greater than ____ or fraction hereof.

For cuts more than ___ in length, the spacing between borings along the length of the cut should generally be between 60 and 120m

At critical locations and high cuts, provide a minimum of __ in the transverse direction to define the existing geological conditions for stability analysis.

For buildings with basements, the depth of boring should extend to ___ the least dimension of the structure's footprint added to the depth of basement.

Which of the following is prohibited as drilling fluid additives in soil investigation?

Soil Penetration Test shall be performed at 450mm sampling depth every ____ interval until the desired depth is attained.

For scaffolding and shoring works, what is the minimum width of any work level?

All Scaffolding and shoring work levels 10m or higher above ground or floor level, shall have a 100mm toe board and handrails no less than ___ or more than 1.07m high with a mid-rail

What is the minimum thickness of aluminum sheeting used for Sign panels (Signages)?

What is the maximum rise of every step in a stairway? BP 344

What is the minimum run of every step in a stairway? BP 344

The maximum variations in the height of risers and the width of treads in anyone flight shall be___.

Clearing shall extend ___ beyond the toe of the fill slopes or beyond rounding of cut slopes as t he case maybe for the entire length of the project.

All materials for excavation shall be classified as follows except:

Basis of payment of structure excavation is the volume outside of vertical planes ____ outside of and parallel to the neat lines of footings and the inside walls of pipe and pipe-arch culverts at their widest horizontal dimensions.

The placing of individual rocks and boulders greater than 600mm in diameter shall be permitted provided that when placed, they do not exceed ___ in height

In areas affected by tidal action(rise and fall of water level) such as seabed, estuary, coastal area, etc. What is the basis of all elevation Computations?

In areas not affected by tidal actions such as riverbeds, floodway channel, creek or estero, etc. All elevations shall be referred to a ___ of known coordinates and elevation based on Mean Sea Level(MSL) established by the National Mapping and Resource Information Authority(NAMRIA).

The bench marks a generally located at about ___ interval along national provincial, and municipal roads.

What is the maximum permissible over dredging?

For reclamation, the materials above Mean Lower Low Water(MLLW) whether obtained by dredging or from borrow pits shall be spread out and compacted in Layers not exceeding _____.

No extraction, removal and/or disposition of materials shall likewise be allowed in offshore areas within 500m distance from the coast to ___ from the mean low tide.

What class of concrete is used for thin reinforced sections, railings, precast R.C piles and cribbing and for filler in steel grid floors?

What class of concrete is used for Prestressed concrete structures and members?

For structural concrete, the Maximum size aggregate (MSA) shall be or not larger than _____ of the narrowest dimensions between sides of forms of the member for which the concrete is to be used nor larger than ____ of the minimum clear spacing between individual reinforcing bars or pre-tensioning strands.

If the coarse aggregate is subjected to 5 cycles of the sodium sulfate soundness, what is the maximum weighted loss?

What is the maximum mass percent of wear of Coarse Aggregates for structural concrete?

For lean Concrete to be placed prior to placing of reinforcing steel bar of any prefabricated structure shall have a minimum compressive strength of ____ the required strength of 13.8 MPa at 7 days.

Lapped splices will not be permitted at locations where the concrete sections are insufficient to provide minimum clear distance of ____ the maximum size of coarse aggregate between the slice and the nearest adjacent bar.

Concrete pouring of structural slab must have at least 20.7 MPa compressive strength at 28 days with a minimum thickness of 50 mm to a maximum of ____.

What is the minimum seating clearance of the joist if laid on steel I-beams?

What is the class of Concrete filler for rocks bulkheads when required for the purpose of preventing the escape of fill material?

Concrete filler for rocks bulkheads when required for the purpose of preventing the escape of fill material, shall be Class ___ concrete plus ____ additional cement conforming to the requirements given under Item 900, Structural Concrete for the class given.

Rocks shall not be out of line on the faces of the bulkheads by more that __.

In excavation for water supply system, which workers may be required to enter, excavated or other materials shall be stockpiled temporarily at least ___ m from the edge of the trench

For Pipeline Trench Excavation, what is maximum amount of open trench permitted at any time and in one location?

For Pipeline Trench Excavation, the bottom of the trench, including any shoring, shall have a minimum width equal to the outside diameter of the pipe plus _____.

For Pipeline Trench Excavation, the bottom of the trench, including any shoring, shall have a maximum width equal to the outside diameter of the pipe plus ____.

Backfill materials shall be laid in horizontal layers, what is its maximum thickness?

Backfill materials shall be laid in horizontal layers, what is its maximum compacted density and to be carried to the level of the surrounding ground?

When curing concrete by waterproof Membrane Method, what is the minimum period the curing membrane shall remain in place?

If the curing compound has not been used within ____ after the date of manufacture additional testing may be required before the use to determine compliance to requirements.

Curing compound shall be applied with a pressure spray shall be of such character that it will harden ____ after application

What is the pipe lining thickness tolerance

What is the minimum pipe coating thickness as per Item 1602 Pipeline system?

All polyethylene pipes shall be rated for use with water at 23C and a minimum working pressure of ____.

Water Treatment Plant shall include any of the following treatment except:

Which of the following is not a type of Valve used for water supply system?

What is the maximum Plasticity index of ill and backfill material?

What is the maximum liquid limit of fill and backfill material?

The Contractor shall provide within ___ upon issuance of the Notice to Proceed(NTP), the vehicles listed in the Contract for the exclusive use of the DPWH Engineer.

What is the minimum roadway lane width when accommodating traffic during work?

For cuts, borings should extend a minimum of __ below the anticipated depth if the cut at the ditch line.

For piles bearing on rock, a minimum of ____ rock core shall be obtained at each exploration point location to verify that the boring has not terminated on a boulder.

Under storm drainage and sewerage system, what is minimum wall thickness of a steel septic tank?

When installing pipes for drainage and sewerage systems, what is the minimum bedding thickness?

What is the minimum number of compartments for septic tank?

Water supply pipes shall be galvanized iron pipe schedule ___.

When conducting a water test on the plumbing system, the water shall be kept in pipe system or in the portion under test, for at least ___ before inspection starts.

When conducting drainage system test, the system shall hold the water for a full ___ during which time there shall be no drop greater than 102 mm.

Powder Termiticide shall not be used if rain is expected to occur within___ of application

For low penetration and sloping sites, how depth is the surface to be scarified before applying toxicants?

When soil shows termite infestation, the building area shall be thoroughly drenched with Type I working solution at the rate of ___.

When soil shows no termite infestation, the area shall be applied with Type I working solution at the rate of _____/

What method of soil poisoning is to be used when there is no visible evidence of termite infestation.

What method of soil poisoning is to be used when the soil shows visible evidence of termite infestation?

Maximum diameter of reinforcing bars shall not exceed ___ of the total thickness of slab.

What is the maximum allowable stress used when designing a PVC Sheet pile structure?

What is the minimum tensile strength of PVC Sheet pile?

What is the minimum flexural strength of PVC Sheet pile?

What is the concrete class used for Concrete Piles?

Pieces of concrete not exceeding ___ can be used as embankment

What is the over dredging tolerance of Item 1703, Dredging for flood and River Control Structures?

For Pea Gravel, there should be 1 Grading test for ___ per source of fraction thereof.

For Fine and Coarse Aggregates, There should be 1 Grading test for ___ per source of fraction there of.

For fine and Coarse Aggregates, there should be 1 Quality test for ___ per source or fraction thereof.

During Air Testing for Storm Drainage Systems, the pressure shall be held without introduction of additional air for a period of not less than ____.

During Water testing for Storm Drainage Systems, Water shall be kept in the system or in the portion under test for not less than ___ before inspection starts.

Manufacturer of Chemical toxicants used for Termite Control Shall be accredited by the Department of Health(DOH) through ____

For Liquid Termiticide Concrete, the concentrate shall be diluted with water in the proportion of 1L of concentrate material to ___ of water.

Rocks weighing 2.5 tons and above used for Rockworks are classified as:

Which of the following shape of rocks is acceptable for Rockworks?

Splices of Reinforcing Steel Bars shall be staggered as far as possible and with minimum separation of not less than ___ diameters.

Epoxy coated reinforcing steel bars shall be applied with protective epoxy coating by the electrostatic spray method to strengthen the concrete and protect against corrosive conditions. No case shall application of the coating be delayed more than ____ after cleaning.

Which of the following is not a Concrete Surface Finishing?

When Transporting and Delivery of Mixed Concrete, the maximum temperature of concrete produced with heated aggregates, heated water, or both, shall at no time during its production or transportation exceed ____.

When a truck mixer or agitator is used for transporting concrete to the delivery point, discharge shall be completed within 1 hour or before ____ revolutions of the drum or blades, whichever comes first, after the introduction of the cement to the aggregates.

When mixing Concrete at Site, all concrete shall be mixed for a period of not less than ____ after all materials, including water, are in the mixer.

During delivery of Concrete, what is the maximum interval between deliveries of batches?

Volumetric measurement shall be used only if the batching plant located more than ___ travel from the project site

Stockpiling of embankment material shall not be situated within __ of a watercourse or permanent structure.

For embankment, what is the minimum area for compaction trials?

Removal of undisturbed stumps and roots and nonperishable solid objects with a minimum depth of ___ below subgrade or slope of embankment is not required.

1 Quality Test of Concrete Pipes for every ___ pcs.

1 Slump Test for every ___ Trucks