Identification Workstation - 20 Questions - Alternative

What is the main purpose of the Identification Station?

To input parts in the Exaparts system and mark them with a barcode for internal tracking

To find parts

To open the parts

To repack the parts

When the forklift is dropping off a pallet to process, where is a safe place for you to stand?

In front of the forklift

Behind the forklift

Out of the forklifts forward and reverse path

Outside

Before Identifying the first part of a pallet, what step(s) should the employee take?

Scan the Pallet into the Exaparts system

Take pictures of the pallet and import them in the Exaparts system

All of the above

What would be a good method for repacking the pallet?

Throw all the parts in quickly

Stack the light parts on bottom

Stack the parts neatly and place the heavy parts on bottom

Asking someone else to do it

What are the three photos needed to be taken of the pallet?

Pallet Closed, Inside the Pallet and Pallet Label close up

Front of the Pallet with Pallet Label attached, Pallet Open from the back and any damage if applicable

Just three photos of the front of the Pallet

Only one photo is needed. The Pallet Label photo

After finishing a pallet, what would be a good next step?

Ask your supervisor/forklift driver for a new pallet

Go home

Surf the internet

Go to a new workstation

After Identifying a part, the employee should...

Find the easiest part to process

Write the part totals on the Pallet label

Take pictures of the parts

Locate the part on the Packing list and highlight it

While unpacking a pallet, you have difficulty with a heavy part. What should you do?

Try harder

Ask your supervisor to supply you with help

Leave that part in the pallet and don't worry about it

Construct a series of levers and pulleys

Where should the printed barcode be placed on a part?

Near the part number and away from any logos

On the Client logo

On the bottom of the part

Inside the part packaging

While bringing you a new pallet, you notice the forklift driver is driving unsafely and appears to be speeding. What action should you take?

Yell at them

Ask them nicely to please stop being so unsafe

No big deal, ignore it

Alert your supervisor of what you have seen

When transferring pictures to the computer, what materials will the employee need?

The computer and a camera

The computer, a camera, an SD card and an SD card reader

Just a camera

A camera and the parts

You have arrived at your workstation at the beginning of your shift with a beverage in your hands. Where can you store your beverage?

At the workstation

Under the workstation

In the kitchen refrigerator

In the office

What actions would the employee take to find the total parts and part size breakdown of the current pallet?

Log out of the Exaparts system

Ask your Supervisor

Click the import photos button

Click the information button in the Exaparts system

After opening a new pallet, you find many damaged parts inside. One of them is leaking some kind of liquid. What action should you take?

Continue processing parts normally

Alert your supervisor and have them document the damage

Clean it up and continue processing parts

Write it on the pack-list

Before a completed Pallet can leave the Identification Station, what is the last step to be performed?

Write the parts total and part size breakdown on the Pallet label and then click "close pallet"

Attach the Packing list to the Pallet label

Log out of the Exaparts system

Cross out parts on the Packing list

The forklift driver has just dropped off a new pallet. On your way to the restroom, you'll need to pass behind them. What actions should you take?

Just walk by quickly

Get the forklift drivers attention, make eye contact and when given the OK, walk by

Yell "DON'T BACK UP" and run by

Go around to the front and walk over the forks

Before taking the three photographs of the Pallet, what action must be taken?

Remove all parts from the Pallet

Attach the Pallet label with tape

Alert the Allocation Station that you have begun processing parts

Sign out of the Exaparts system

When unpacking the pallet, what can you do to make repacking the pallet easier and more efficient?

Keep the parts in order as you take them out and process them

Place the parts on the ground

Stack the parts on top of each other

Write numbers on the parts

Which part of the Identification process can be changed if it is entered incorrectly?

The part description

The Pallet pictures

The part/reference number

The Pallet number

Your shift begins at 8:30am, this means you should be at your workstation by...

8am

9am

8:31am

8:29am

Identification Workstation - 20 Questions - Alternative

More Quizzes