Survey Maker Survey Templates Contact Privacy & Security

Engineering Inspection Challenge

A detailed, high-tech automotive engineering scene with diagrams and technical specifications, featuring a racing car on a track surrounded by engineers examining performance data.

Engineering Inspection Challenge

Test your knowledge on engineering regulations and inspections with our comprehensive quiz. This quiz is designed for automotive enthusiasts, engineers, and students to enhance their understanding of technical compliance.

8 engaging multiple-choice questions
Evaluate your knowledge on vehicle inspections and compliance standards
Perfect for teams preparing for competitions

8 Questions2 MinutesCreated by InspectingEngine126

Is this IAA rules compliant? IAD Test: + 15,68 miles ph + 7,35 kJ + 18,9 G average + 20,1 G maximum

No, because its geometry

No, because of the IAD velocity

Yes

No, average acceleration too low

Concerning technical inspection, which is false:

Insulated cable shears, as well as insulated screw drivers, must be presented in the accumulator inspection.

The driver's equipment is checked at the pre-inspection.

When weighing the vehicle, all fluids must be at their maximum fill level.

The rain test must be passed with the vehicle in ready to drive mode.

Which of the following bearings can hold forces in both directions on the x axis (x>0 and x<0) and on the y axis?

In FSG 2018 AutoX, two teams have done the following times: Team 1: Time: 1587,46s; DOO?; OC: 1 Points: 64,34 Team 2: Time: 1450,32s; DOO: 8; OC: 1 How many cones has team 1 thrown?

Which of the following statetements regarding the cost report is false?

The BOM musn’t include the cost of the parts.

The upright is a part of the Wheels, Wheel Bearings and Wheel and Tires System.

In FSG, the team that wins the cost report the previous year, will be the first of doing it the following year if enters in the competition.

The maximum score of the event is 100 points.

All of the above

None of the above

What is the material of the tube in this test? + Tube length = 300 mm. + Load applied = 1 kN. + Inner diameter = 16 mm. + Outer diameter = 20 mm. + Maximum deflection = -4,313mm.

Steel

Copper

Aluminium

Silicon carbide

During the endurance, I may pass a disabled vehicle on the track:

Only in a overtaking lane

Cautiously if the track is wide enough

Never, because if you do it, you will violate the rules

Only if the track marshalls instruct me to

All of the above

None of the above

Which part of this chassis is not rules compliant? (Main hoop is ONE tube and distances in mm)

Front Bulkhead

Front Bulkhead Support

Front Hoop

Front Hoop Bracing

Side Impact Structure

Main Hoop

Main Hoop Bracing

Main Hoop Bracing Support

{"name":"Engineering Inspection Challenge", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on engineering regulations and inspections with our comprehensive quiz. This quiz is designed for automotive enthusiasts, engineers, and students to enhance their understanding of technical compliance.8 engaging multiple-choice questionsEvaluate your knowledge on vehicle inspections and compliance standardsPerfect for teams preparing for competitions","img":"https:/images/course2.png"}