Survey Maker Survey Templates Contact Privacy & Security

RADIO COMMUNICATIONS PPL 3

An airplane cockpit with radio communication equipment and a pilot actively using a microphone, surrounded by charts and aviation gear, bright daylight, cockpit dashboard visible.

Radio Communications Quiz for PPL

Test your knowledge on radio communications critical for Private Pilot License (PPL) holders. This quiz will cover key signaling methods, Q codes, and ATC communication protocols.

Compare your understanding of:

ATC signal meanings
Q codes and their applications
Communication procedures and terminology

10 Questions2 MinutesCreated by FlyingBird42

If the control tower uses a light signal to direct a pilot to exercise extreme caution while on the ground?

Flashing Green

Alternating Red and Green

Steady Green

Flashing White

The Q code on which height is based on:

QNH

QFF

QFE

QUJ

If you are unable to contact a station on a designated frequency you should?

Try another appropriate frequency

Start transmitting blind

Land at the nearest suitable aerodrome

Transmit words twice

The term “CORRECTION” is used when?

The readback of a message is incorrect

The readback of a message is correct

The message has to be deleted

An error has been made in the transmission and the correct version is

When asking for a repeat of a message, you should say?

WORDS TWICE

REPEAT MESSAGE

SPEAK SLOWER

SAY AGAIN

Readability 2 means that your transmission is:

Readable but with difficulty

Readable

Readable now and then

Two way communication have been established

The message “CHECK” to an aircraft means that you should:

Confirm that you received and understood the last message

Pass the required information to ATC

Stay where you are

Examine a system or procedure

Your action in response to the instruction from ATC to “RESET SQUAWK” is to:

Set the numbers to 7000

Reselect the numbers on the control unit

Switch to standby and back to ON

Press the IDENT button

The full range of VHF frequencies used for communications is

3 to 30 MHz

88 to 108 MHz

108.0 to 139.95 MHz

117.95 to 135.95 MHz

The definition of the instruction "MONITOR..." is:

Listen out on frequency

Establish communications on frequency

Watch out for visual signals on frequency

You are being watched

{"name":"RADIO COMMUNICATIONS PPL 3", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on radio communications critical for Private Pilot License (PPL) holders. This quiz will cover key signaling methods, Q codes, and ATC communication protocols.Compare your understanding of:ATC signal meaningsQ codes and their applicationsCommunication procedures and terminology","img":"https:/images/course6.png"}