M7

Create an image of an aircraft maintenance technician working on a plane, surrounded by tools, electrical components, blueprints, and safety equipment, with a focus on an engaging and educational atmosphere.

Aircraft Maintenance Knowledge Quiz

Test your knowledge in the field of aircraft maintenance with this engaging quiz! Covering a wide range of topics, from electrical installations to mechanical properties, this quiz is perfect for aviation enthusiasts and professionals alike.

Key Features:

30 challenging questions
Covers practical and theoretical aspects of aircraft maintenance
Ideal for both beginners and experienced personnel

60 Questions15 MinutesCreated by FlyingTool57

Drawing that doesn't need drawing instruments

What ATA chapter is Hook-up list located?

Requires heat being applied to it for the curing to start 90-380◦

What has a maximum height of 2.5 inches?

Removes oxidation

An analytical logic procedure specifically designed to identify applicable and effective

How many splices allowed?

How many unstripped wire in end caps?

Cutting an object showing the view of an object or component from the inside

Determines out-of-round?

Contains detailed data and procedures for electrical installations in every aircraft of the AIRBUS Family.

Diagram showing every component related to the system

Prevent interference

This prevents EMI

Either interference or clearance, overlapping

Final finish, to remove raw edges.

Is a process which removes material from metal or wood.

Raised part of the drill that avoids it from seizure

Peripheral portion of the body between adjacent flutes.

Too large upset head

Depends on the thickness of the thinnest sheet

Considered as high altitude

Used in design, construction and maintenance of engineering projects

Differnce between the diameters of a shaft and a hole if the hole is diameter is larger than the shaft diameter

What occurs if the flush head height is larger than the materials thickness

Came from crude oil

Reaction chromium and carbon

Adjusts tension in cables

Ability to be absorbed in gaps?

Used in assembly areas to check interface gaps or gaps under bolt heads or nuts.

- Is done by filling a gap between two parts which is the base material with a melted metal

- The lowest temperature that must exist at the contact area of solder and work piece in order to let the solder flow and adhere to the parent metal is called

, the lower limit is the operating temp itself and the upper limit is the maximum soldering temperature.

Consists of joining two or more pieces of metal by applying heat or pressure with or without filler material.

- This is where the thermal energy needed to bond the material is acquired by mechanical friction

- Is a sub type of friction welding where there is a cylindrical tool that makes contact with the two metal parts bonding the metal atoms

- Is where dynamic load and heat are applied in a controlled environment where the grains diffuse over time

- Describes mostly non detachable joints between the same or different materials

Is the internal attraction between molecules within the liquid

Is the attraction between a liquid and a solid surface

Commonly has 2 or 3 rivet rows single shear connection as the stress is in a single location

Single shear connection, the two elements are connected with an inner lug and two to 4 row rivet joints per side

This technique increases weight and decreases aerodynamic efficiency – connected by 2 lugs

A rivet diameter of ______ TIMES the thinnest sheet thickness is selected.

Airbus uses the denomination _______ for the distance between the rivets centre and the elements edge

__________ describes the distance between the fastener hole wall and the edge of the component.

Is the distance between the fastener rows, taken from the hole centers USE 4 to 5 D as rule of thumb

Area in between the fasteners

S the process of forming the upset head of a rivet by blowing on the rivet’s shank with a hammer.

7X19 cable, how many broken wire is allowed per strand

The matrix system is composed of what 2 chemicals

For new manufacturer cable lines, what should we do first before we install it

Amount of rotational force when tightening a fastener

What are the three step sa taps

Taper tap, intermediate tap, bottoming tap

Hand tap, bottoming tap, intermediate tap

immediate tap, hand tap, bottoming tap

This is use to scribe arc and circles

Quotes the upper and lower allowable limit

What is the recommended load weight for manual lifting

Torque wrench with clicking signal

What kind of sign commands a certain action

{"name":"M7", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge in the field of aircraft maintenance with this engaging quiz! Covering a wide range of topics, from electrical installations to mechanical properties, this quiz is perfect for aviation enthusiasts and professionals alike.Key Features:30 challenging questionsCovers practical and theoretical aspects of aircraft maintenanceIdeal for both beginners and experienced personnel","img":"https:/images/course8.png"}