Survey Maker Survey Templates Contact Privacy & Security

Rulebook 2

A futuristic racing vehicle in a competition environment, showcasing advanced engineering and technology, with spectators cheering and a track in the background.

FB2023 Competition Quiz

Test your knowledge about the FB2023 competition rules and requirements with this informative quiz. Whether you're a seasoned participant or a newcomer, this quiz aims to enhance your understanding of the rules that govern vehicle participation.

Topics covered include:

Vehicle eligibility
Technical specifications
Safety requirements
Documentation and registration

15 Questions4 MinutesCreated by DrivingEagle423

For the FB2023 competition, first year vehicles that participated at FB2022 will not be considered as a second year vehicle.

False

True

CR -

Cost Report

Cost & Manufacturing event

Correction request

Consideration request

Participants who have completed on-site registration (i.e. Registered and present on-site) and have submitted all relevant documents shall receive an electronic participation certificate within __________ of the competition completion.

1 week

3 week

4 week

2 week

Waste oil must be taken to the fuel station for disposal

True

False

No part of the vehicle may enter a keep-out-zone defined by two lines extending vertically from positions _______ in front of and ______ behind the outer diameter of the front and rear tires in the side view of the vehicle

75mm, 75mm

80mm, 75mm

65mm, 75mm

100mm, 100mm

Enclosed chassis structures and structures between the chassis and the ground must have two venting holes of at least ______ diameter in the lowest part of the structure to prevent accumulation of liquids. Additional holes are required when multiple local lowest parts exist in the structure.

25mm

50mm

75mm

40mm

Non-welded strength for continuous material calculations, Young‟s Modulus (E) =

180 MPa

200 MPa

200 GPa

210 GPa

If composite materials are used in the primary structure or the TSAC, the SES must include:

Material type(s)

Resin type

Number of layers

All of the above

On all vehicles, a ______ solid steel or _______ solid aluminum AIP must be integrated into the IA.

1.5mm, 4mm

1.8mm, 4mm

1.5mm, 5mm

2mm, 4mm

The closeout must extend from the rear bulkhead to the firewall.

True

False

Finger guards are required to cover any drivetrain parts that spin while the vehicle is stationary with the engine running. Finger guards may be made of lighter material, sufficient to resist finger forces. Mesh or perforated material may be used but must prevent the passage of a 12 mm radius object through the guard.

False

True

The center of any master switch must not be mounted lower than the vertical distance of the template‟s (see T4.3) middle circle center to the ground surface multiplied by ____

0.70

0.10

0.90

0.80

The name must be displayed and written in Roman Sans-Serif characters of at least _______ high on both sides of the vehicle.

50mm

60mm

75mm

65mm

When power is removed, the electronic throttle must immediately close at least to idle position ±5%. An interval of one second is allowed for the throttle to close to idle, failure to achieve this within the required interval must result in immediate disabling of power to

Throttle

Ignition

Fuel valves

All of these

The number of tools that may be used in this area is restricted to those which can be safely carried by the four team members in one trip.

False

True

{"name":"Rulebook 2", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge about the FB2023 competition rules and requirements with this informative quiz. Whether you're a seasoned participant or a newcomer, this quiz aims to enhance your understanding of the rules that govern vehicle participation.Topics covered include:Vehicle eligibilityTechnical specificationsSafety requirementsDocumentation and registration","img":"https:/images/course1.png"}