RuleBook T1-T10
Formula Racing Compliance Quiz
Test your knowledge on the compliance regulations for Formula racing vehicles with our detailed quiz. This quiz covers various topics, ensuring you understand the technical requirements and safety standards necessary for participation in races.
- 10 engaging and challenging questions
- Assess your understanding of vehicle rules
- Perfect for teams and individuals preparing for competitions
Which of the following is/are NOT rule compliant ?
The combustion vehicle uses oil as coolant.
K-nuts are used for locking bolts in Suspension System.
Fasteners used for scatter-shield mounting are 5mm in diameter
Brake pedal is fabricated from Titanium.
What is the maximum length (in forward direction) of the front wing extending outboard than the front wheels? (Answer in mm)
What is the density of a head restraint which has dimensions 160x180 with a mass of 155g? (assume min. Dimensions if not provided & answer until two decimal points in g/mm3)
How can you attach IA assembly if bolted?
10 mm bolts
8 mm metric 8.8 bolts
10 mm class 10.9 steel bolts
2 fasteners of 9 mm metric 8.8
What is the strain at a non-welded joint for the calculation in SES if a force of 50kN acts on an area of 1.2in? (answer up to 2 non zero decimals)
Team AGNI got selected to participate in FSAustria. The dates of the competition were announced and acceleration event will be on December 31st 2020 and endurance on January 1 st 2021. They have outsourced a harness with a SFI spec 16.1 dated 12/31/2018 from another team. Will the team be able to participate in all the events even if they clear the TI?
Yes
No
Can't Say
If a bent tube is used anywhere in the primary structure ,other than the front and main roll hoops an additional tube must be attached to support it, the attachment point must be the position
Along the tube where it deviates farthest from a straight line connecting any one end
Where the ansys analysis holds true at any point
Along the tube where it deviates farthest from a straight line connecting at the peak
Along the tube where it deviates farthest from a straight line connecting both ends
For not welded driver's harness to steel structure, attachment points of anti submarine belts should support load of ___. (Answer in kN)
For chromoly tube of 25.4mm outer diameter, what should be the min radius of bend measured at tube centerline for a bend in main hoop 330mm from top most point of main hoop to make it compliant ?
24.8 mm
48.4 mm
62.8 mm
None of the above
In case of SIS being a part of composite structure, the vertical SIS must have an absorbed energy equivalent to __
1
2
4
3
{"name":"RuleBook T1-T10", "url":"https://www.quiz-maker.com/QPREVIEW","txt":"Test your knowledge on the compliance regulations for Formula racing vehicles with our detailed quiz. This quiz covers various topics, ensuring you understand the technical requirements and safety standards necessary for participation in races.10 engaging and challenging questionsAssess your understanding of vehicle rulesPerfect for teams and individuals preparing for competitions","img":"https:/images/course7.png"}
More Surveys
LLSS Rules
420
HR INTERVIEW MAROBI
1476
Bu 2 transportation systems (parts of escalator not included)
52260
TAM Quiz 1
11617
Safety Analyst Training
17835
Chapter 2 Meaningful Names & Chapter 3 Functions
10512
Procedures and checklists
10530
Risk and Controls
5281
Policy Quiz
10527
Accounts Receivable and Co-Marketing Survey
8433
FCPA Quiz
10519
Client Data Protection Awareness
17846