Rulebook Test

A well-organized engineering competition with teams working on vehicles, focusing on rule compliance and technical specifications, bright colors and competitive atmosphere.

Rulebook Test Quiz

Welcome to the Rulebook Test Quiz designed for students and teams participating in engineering competitions. This quiz will help you assess your understanding of the competition rules and guidelines.

Take this opportunity to:

Test your knowledge of class regulations
Prepare for upcoming iterations of the competition
Enhance your team's strategy for success

15 Questions4 MinutesCreated by DrivingForce42

Officials do not reserve the right to change the status of a Class II team to Class I, at their discretion.

True

False

Failure of a team member to follow an instruction or command directed specifically to that team or team member will result in _____ penalty points being deducted from the team's

25, Event score

20 points, Overall score

20, Overall Score

25, Overall Score

The appointed Faculty Advisor must be the participating institution's Faculty member and the individual should have completed their undergraduate studies _________ prior to assuming such a post.

3 Years

4 Years

36 Months

A & C

What should be the angle for lap belt of driving position for reclined

45° and 65° with respect to vertical

60° and 80° with respect to vertical

60° and 80° with respect to horizontal

60° and 85° with respect to horizontal

The head resistant must have at least

Maximum width 150 mm

Padding energy absorption minimum thickness 40 mm

It's attachments and mounting must withstand force 890 N

B & C

Each team must have a removable device that lifts up the vehicle, so that all driven wheels are _________ off the ground and the vehicle is adequately supported. All non driven wheels must not touch anything else than the ground.

At least 10 cm

Maximum 100 mm

At least 10 mm

Minimum 100 cm

Repeated actuation of the switch must not close the shutdown circuit, and it must be designed so that the driver cannot reset it.

True

False

All fasteners attaching scatter shields and guards must be _____ metric grade ____ or stronger

4mm, 12.9

6mm, 8.8

6mm, 12.6

8mm, 12.9

Prior to the tilt test specified in IN7, engines fitted with mechanically actuated fuel pumps must be run to fill and pressure the system upstream of the high pressure pump.

True

False

In post autocross inspection , how much penalty is imposed on a team which Violates the rules without advantage for themselves .

0.5s

Measurements will be made with a free-field microphone placed free from obstructions at the exhaust outlet level, ______ from the end of the exhaust outlet, at an angle of _____ with the outlet in the horizontal plane.

0.5cm, 45°

0.5m, 60°

0.25cm, 45°

0.5m, 45°

The top teams from Class II will be judged BPP finals at the competition. The teams will be notified _________ before the competition dates.

At least 5 days

Maximum 10 days

At least 10 days

Minimum 30 days

The driver must pull into the driver change area for a mechanical inspection of the vehicle, something has been observed that requires a closer inspection.

Blue Flag

Black Flag

Black Flag with orange dot

Red Flag

Rulebook Test

Rulebook Test Quiz

More Surveys