Ruel book quiz

A dynamic racing scene depicting a formula-style car with emphasis on safety features and rule compliance, vibrant colors, showcasing an action-packed motorsport environment.

Ruel Book Quiz

Test your knowledge about the Ruel book and its associated rules! This quiz covers various important aspects and regulations that every enthusiast should know.

Prepare for challenging questions that will help you gauge your understanding of key concepts.

Multiple-choice questions
Covering topics like safety, design, and regulations
Fun and engaging format

15 Questions4 MinutesCreated by DrivingForce527

The bodywork in front of the front wheels must have a radius of at least_______ mm extending at least _______relative to the forward direction, along the top, sides and bottom of all affected edges.

38 , 40°

35 , 45°

30 , 45°

38 , 45°

Both roll hoops must have one _______ hole in a non-critical straight location and its surface at this point must be unobstructed for at least _______.

1.5 mm , 180°

4.5 mm ,180°

3.5 mm ,160°

2.5 mm, 180°

The brake pedal and its mounting must be designed to withstand a force of 2 N without any failure of the brake system or pedal box.

False

True

Any catch can must vent through a hose with a minimum internal diameter of _________down to the bottom level of the chassis and must exit outside the bodywork.

2 mm

8 mm

3 mm

5 mm

LV batteries must be protected from short circuits, not more than _________from ungrounded terminals.

120 mm

150 mm

100 mm

110 mm

The track is slippery or something is on the racing surface that should not be there. The driver must be prepared for evasive maneuvers to avoid the situation.

Green and yellow striped flag

Red and black striped flag

Black and yellow striped flag

Red and yellow striped flag

In Acceleration event, Cones are placed along the course at intervals of about ________.

7 m

3 m

5 m

3.5 m

Any aerodynamic device must be able to withstand a force of _______ applied in any direction at any point and not deflect more than ______

25 N,25 mm.

55 N,25 mm.

50 N,20 mm.

50 N,25 mm.

The shoulder harness mounting points must be between ____________ apart, measured center to center.

120 mm and 230 mm

180 mm and 250 mm

180 mm and 230 mm

160 mm and 230 mm

Ruel book quiz

Ruel Book Quiz

More Quizzes