Eventhandbook FSEAST, FSG, FSA

A futuristic racing event with students building vehicles and improving technologies in a dynamic environment.

Eventhandbook Quiz Challenge

Test your knowledge and understanding of the essential guidelines and regulations from our Eventhandbook. This quiz is designed for teams participating in Formula Student events, ensuring you are well-prepared for the challenges ahead.

Whether you're a seasoned veteran or a newcomer, you can:

Enhance your understanding of event rules
Prepare effectively for technical inspections
Engage with fellow participants

15 Questions4 MinutesCreated by PreparingPilot247

(FSG) What is correct?

The DL must be supplied by a voltage of 7VDC to 60VDC It draws a maximum power of 9 W

The DL must be supplied by a voltage of 9VDC to 60VDC It draws a maximum power of 7 W

The DL must be supplied by a voltage of 7VDC to 60VDC It draws a maximum power of 7 W

The DL must be supplied by a voltage of 9VDC to 60VDC It draws a maximum power of 9 W

(FSG) The markings of all dynamic events may not have one of the following characteristics:

The track is marked with cones

The left borders of the track are marked with small blue cones

The right borders of the track are marked with small yellow cones.

Exit and entry lanes are marked with small orange cones.

Big orange cones will be placed before and after start, finish and timekeeping

If not defined otherwise in chapter D of the rules, the maximum distance between two cones in driving direction is 5m. In corners, the distance between the cones is smaller for a better indication.

The start, finish and timekeeping lines as well as keep out zones around the timekeeping equipment are marked with red, orange or pink paint.

Additionally for skid pad and trackdrive, track limit lines on either side of the track and entry/exit lanes may be marked with orange, green or white paint.

There are no track limit lines for acceleration and Emergency Brake System (EBS)-test

(FSG) Which of the following is not correct?

2019-03-15 13:00 CET; ASF Add Item Request (AAIR); DV

2019-03-15 13:00 CET; Structural Equivalency 3D Model (SE3D); ALL

2019-03-16 13:00 CET; Structural Equivalency Spreadsheet (SES); ALL

2019-05-31 13:00 CEST; Business Plan Executive Summary (BPES); ALL

2018-06-14 13:00 CEST; Team Member Designation (TMD); ALL

2019-06-14 13:00 CEST; Electrician System Officer Qualification (ESOQ); EV

(FSG) For the BPP

Use of audio is permitted

You are not allowed to bring your own projector

You are allowed to bring more then 2 people, as long as you declare them as presentation equipment

HDMI (Type B) connectors will be provided

(FSG) Check the correct statements

There will be one quiz for all three classes.

When entering the quiz late, depending on the delay, the first questions will not be visible anymore.

Pre-inspection will be conducted in the pit, where the technical inspectors will visit the teams according to the registration quiz order.

Within teams with the same amount of correct quiz answers, the quiz result order will depend on the time needed for completion of the quiz.

The quiz will close after the time to answer the last question has expired.

No feedback if the answer was correct will be provided until the results are published. After the result are published, teams have one hour to hand in protest.

Eventhandbook FSEAST, FSG, FSA

Eventhandbook Quiz Challenge

More Surveys